 The Oboe BBoard
|
Author: Chris P
Date: 2009-09-24 00:29
Make sure the pinning screws (for the low B touch and foot) are tight, though be careful you don't over-torque them as the heads can break off. Use a very thin tipped screwdriver for these. And check the pinning screws on the C# key as well (one for the head and two for the pad cup).
The threads are 12BA on the pinning screws as are the flat spring screws - all other screw threads are M2x0.4 (except for the wood screws which have a coarse thread, and the Eb master spring screw is a small coarse threaded screw).
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
|
Mightyg |
2009-09-09 15:23 |
|
Chris P |
2009-09-09 15:31 |
|
vboboe |
2009-09-10 02:11 |
|
Dutchy |
2009-09-10 02:53 |
|
Mightyg |
2009-09-18 15:03 |
|
Mightyg |
2009-09-21 22:36 |
|
Chris P |
2009-09-21 23:55 |
|
Dutchy |
2009-09-22 04:39 |
|
jhoyla |
2009-09-22 07:12 |
|
Mightyg |
2009-09-23 20:28 |
|
Chris P |
2009-09-23 21:49 |
|
Mightyg |
2009-09-23 23:30 |
|
Chris P |
2009-09-24 00:29 |
|
Mightyg |
2009-09-30 00:10 |
|
The Clarinet Pages
|
 |
.jpg){kind=small}
