Woodwind.OrgThe Oboe BBoardThe C4 standard

 
  BBoard              
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: Shaper tips -- changing one aspect will cause what?
Author: DrewSorensenMusic 
Date:   2012-08-08 16:54

Thank you Robert. May I say that as a Cancer I am partial to compliments.

While this thread has take a few twists and turns, the latter half of it seems to be dedicated to shape in terms of "low-note response vs high-note stability". This has been something that I've been working on, especially low-note response in all dynamics. In my study, I wonder, could reed response be directly related to reed mass?

When I make reeds, they usually start off responding well in the middle range, the upper range sounds good, but plays sharp, and the low register requires more air and tends to be a bit brash. At this point I sandpaper the throat and underside of the belly, and this seems to make the low register more controllable. For a long time, I just considered this as a reflection of internal diameter, but not I am not so sure. Personally, I feel that maybe with less cane to move with your air, the easier it should respond. Also, the throat might need to have less cane present than the heart and throat, because the reed vibrating to create the tone of the low notes, would have to move the same amount of cane used to create the high and mid-range notes, as well as the additional cane lower down the reed used for low note production. Just some food for thought.

Drew S.

P.S.- I re-recorded an etude if anyone is interested or bored
http://youtu.be/0b742j5JT9s

 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 Shaper tips -- changing one aspect will cause what?  new
Oboehotty 2012-05-11 15:44 
 Re: Shaper tips -- changing one aspect will cause what?  new
GoodWinds 2012-05-11 16:06 
 Re: Shaper tips -- changing one aspect will cause what?  new
Oboe Craig 2012-05-11 23:13 
 Re: Shaper tips -- changing one aspect will cause what?  new
GoodWinds 2012-05-12 00:32 
 Re: Shaper tips -- changing one aspect will cause what?  new
Oboehotty 2012-05-12 12:36 
 Re: Shaper tips -- changing one aspect will cause what?  new
RobinDesHautbois 2012-05-12 15:07 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-05-12 20:51 
 Re: Shaper tips -- changing one aspect will cause what?  new
Oboehotty 2012-05-13 14:39 
 Re: Shaper tips -- changing one aspect will cause what?  new
Bobo 2012-05-13 15:36 
 Re: Shaper tips -- changing one aspect will cause what?  new
johnt 2012-05-13 16:59 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-05-13 17:54 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-05-13 18:00 
 Re: Shaper tips -- changing one aspect will cause what?  new
Bobo 2012-05-14 00:32 
 Re: Shaper tips -- changing one aspect will cause what?  new
Oboehotty 2012-05-14 00:51 
 Re: Shaper tips -- changing one aspect will cause what?  new
JRC 2012-05-14 02:22 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-05-14 05:48 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-05-18 15:42 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-05-18 18:37 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-05-18 21:46 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-05-19 04:40 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-05-20 16:03 
 Re: Shaper tips -- changing one aspect will cause what?  new
johnt 2012-05-20 18:34 
 Re: Shaper tips -- changing one aspect will cause what?  new
mjfoboe 2012-05-20 19:20 
 Re: Shaper tips -- changing one aspect will cause what?  new
Carole417 2012-08-06 01:51 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-08-06 04:31 
 Re: Shaper tips -- changing one aspect will cause what?  new
Carole417 2012-08-06 17:09 
 Re: Shaper tips -- changing one aspect will cause what?  new
jhoyla 2012-08-06 06:36 
 Re: Shaper tips -- changing one aspect will cause what?  new
mjfoboe 2012-08-06 12:51 
 Re: Shaper tips -- changing one aspect will cause what?  new
Carole417 2012-08-06 13:17 
 Re: Shaper tips -- changing one aspect will cause what?  new
jhoyla 2012-08-06 14:18 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-08-08 11:38 
 Re: Shaper tips -- changing one aspect will cause what?  new
Oboe Craig 2012-08-09 03:21 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-08-08 16:48 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-08-08 16:54 
 Re: Shaper tips -- changing one aspect will cause what?  new
RobinDesHautbois 2012-08-15 11:07 
 Re: Shaper tips -- changing one aspect will cause what?  new
huboboe 2012-08-09 21:47 
 Re: Shaper tips -- changing one aspect will cause what?  new
DrewSorensenMusic 2012-08-15 13:58 
 Re: Shaper tips -- changing one aspect will cause what?  new
RobinDesHautbois 2012-08-16 14:14 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org