Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 collapse finger
Author: chito 
Date:   2008-02-13 13:51

Hi i need help any advise or tips how to improve the collapse finger .
Recently my right hand fingers get collapse specially
the 1st & 3rd fingers very hard to play and im so worry thank you .

Reply To Message
 
 Re: collapse finger
Author: bmcgar 2017
Date:   2008-02-13 14:54

Photographs would help, Chito.

It's difficult to understand what you mean when you say "collapsed fingers."

B.

Reply To Message
 
 Re: collapse finger
Author: Paul Aviles 
Date:   2008-02-13 17:32

I think you are talking about what some have referred to as "Broken Noses," where the first knuckel bends in toward the clarinet.

All I can say for this, is that you need to keep more of a curve to your fingers, covering the tone holes with more of the "tip" of the fingers than the pads.


............Paul Aviles



Reply To Message
 
 Re: collapse finger
Author: Blake Arrington 
Date:   2008-02-14 00:36

I've had a few students with this problem. They actually came up with a great solution...they got some large paper clips and bent them to make what looked like an arch with two rings on each end. They would slip it on like a ring and have the curved portion under their fingers...this would keep the knuckles from breaking.

Hope this helps.

Reply To Message
 
 Re: collapse finger
Author: marshall 
Date:   2008-02-14 05:28

Relax your fingers more. I used to have the same problem, and it's usually a sign that you're putting to much pressure on the instrument.

Reply To Message
 
 Re: collapse finger
Author: skygardener 
Date:   2008-02-14 12:11

Hi Chito,
You and I met at the ICA festival in Tama in 2005. I am living in Japan, too. Are you still in Kyushu?
Anyway, as for your problem. I remember that you had rather large hands and that causes you to come down on the tone holes from a ver steep angle (if you curve your fingers). I suspect that your clarinet has the lower joint rings about even with the tone holes. Is this true? Collapsing your fingers allows you to push the rings all the way down. If my hunch is right, and your rings are low, then you should try to have them raised a little. This will help you, I think.
Contact me offline if you are coming to Tokyo area.

Reply To Message
 
 Re: collapse finger
Author: Synonymous Botch 
Date:   2008-02-14 13:03

A larger thumbrest will encourage a more open hand position.

The Ridenour saddle, and Ton Kooiman designs work well.
I prefer the TK Maestro for this purpose.

It may also be worth considering the position of your lower arms, at the elbow.

Reply To Message
 
 Re: collapse finger
Author: chito 
Date:   2008-02-14 13:33

Skygardener,
You and I met at the ICA festival in Tama in 2005. I am living in Japan, too. Are you still in Kyushu?
Anyway, as for your problem. I remember that you had rather large hands and that causes you to come down on the tone holes from a ver steep angle (if you curve your fingers). I suspect that your clarinet has the lower joint rings about even with the tone holes. Is this true? Collapsing your fingers allows you to push the rings all the way down. If my hunch is right, and your rings are low, then you should try to have them raised a little. This will help you, I think.

Hi thank you for the adviced i will try to raised a little and try to look very carefully.
I remember you im still in kyusyu ill contact you when i go to tokyo thank you.

Reply To Message
 
 Re: collapse finger
Author: chito 
Date:   2008-02-14 13:37

I've had a few students with this problem. They actually came up with a great solution...they got some large paper clips and bent them to make what looked like an arch with two rings on each end. They would slip it on like a ring and have the curved portion under their fingers...this would keep the knuckles from breaking.

I start to do this today when i read your post thank you .

Reply To Message
 
 Re: collapse finger
Author: chito 
Date:   2008-02-14 13:48

A larger thumbrest will encourage a more open hand position.

The Ridenour saddle, and Ton Kooiman designs work well.
I prefer the TK Maestro for this purpose.

It may also be worth considering the position of your lower arms, at the elbow.

Thank you for responce i used Ton Kooiman Maestro before but not work for me. And i bought Ridenour saddle last week and im using now.

Reply To Message
 
 Re: collapse finger
Author: Ken Shaw 2017
Date:   2008-02-14 16:57

Here are three exercises from Larry Guy demonstrated at the Clarinet Symposium several years ago:

1. Put your hand flat on a table and pull it back from the elbow, pressing your fingertips into the table to resist.

2. Put the heel of your hand on a table, fingers slightly curved, and do "fingertip pushups."

3. Close your hand around a tennis ball, squeezing with your fingertips.

By the way, you asked the same question a couple of years ago http://test.woodwind.org/clarinet/BBoard/read.html?f=1&i=179321&t=179174.

Ken Shaw

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org