Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 How to obtain Moenigg Barrels
Author: Chris22311 
Date:   2007-03-11 22:35

Who has some in stock? I've heard that not many do have any in stock?

Chris

Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: claritoot26 
Date:   2007-03-12 02:15

Vincent Marinelli in Wilmington, DE has them.

Lori

Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: Grabnerwg 
Date:   2007-03-12 17:50

Buffet Moennig barrels are rather scarce right now. The lead time to get them from Buffet is 3 to 6 months.

Walter Grabner
www.clarinetxpress.com

Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: Ken Shaw 2017
Date:   2007-03-13 14:40

According to Guy Chadash, the Moennig and Chadash barrels supplied by Buffet both have a reverse taper, smaller at the bottom than the top. They have the same diameter at the bottom, but the Moennig is larger at the top and thus has a more severe taper. The tapered bore improves tuning and focuses the tone.

Guy says that Moennig himself used the greater taper but also made the barrel's top socket deeper, which increased the volume of the bore due to the gap between the mouthpiece tenon and the bottom of the socket. Buffet's Moennig barrels don't have the deep socket and thus don't work as well as the Chadash barrels, which are designed to have no gap and have a compensating adjustment of the taper. See http://test.woodwind.org/clarinet/BBoard/read.html?f=20&i=289&t=289 at the MOENNIG VS. CHADASH BARRELS section.

Thus if you can't find a Buffet Moennig barrel, it would be worthwhile trying the Buffet Chadash.

See also the current string on Chadash barrels at http://test.woodwind.org/clarinet/BBoard/read.html?f=1&i=240456&t=240456

Ken Shaw

Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: Alseg 
Date:   2007-03-13 15:44

Keep in mind that the more severe "older" taper Moennig barrels
were designed to correct for the problems of the day. There were musicians using mouthpieces with wider exit bores that were designed for other clarinet brands.
Additionally, Moennig would adjust the bell tenon length to compensate for acoustical changes when his barrel was adopted.
Since that time, the bores and mouthpiece chambers have evolved, as well as register tube placement, etc.
All this should be considered when picking up a barrel of any make.
.
. Disclaimer. I make and sell custom barrels.


Former creator of CUSTOM CLARINET TUNING BARRELS by DR. ALLAN SEGAL
-Where the Sound Matters Most(tm)-





Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: William 
Date:   2007-03-13 18:22

Just noticed on Walter Grabner's website that he offers--among lots of other good clarinet stuff--Moenig style barrels.

http://www.clarinetxpress.com/

Reply To Message
 
 Re: How to obtain Moenigg Barrels
Author: Detru Cofidin 
Date:   2007-03-15 03:10

I bought one from Weiner music from their website. It's tested of course. Took less than a week by mail.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org