Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Mouthpiece for your reed
Author: Alex 
Date:   1999-02-14 19:34

Another question.. I've been having some problems with my tone, it's coming out nice for the most part, but it sounds kind of muffled.. recently someone suggested that it might be because of my mouthpiece. I play on V12 reeds and a B45 mouthpiece, and the person mentioned that the B45 left a fairly large amount of room between the reed and the table, and with V12s, the reeds were too hard to have that much space... He recomended a 5RV or a Jewel Concert C mouth piece, and one of my instructors said that a Pyne was really good too... does anyone have something to say about this? or suggestions of a different mouth piece that might be even better?

Reply To Message
 
 RE: Mouthpiece for your reed
Author: Dee 
Date:   1999-02-14 19:47

What strength of V-12 reed are you using on the B-45 mouthpiece? According to the Vandoren literature, you shouldn't use a reed stronger than about the equivalent of the standard Vandoren 3.5 reed.

Reply To Message
 
 RE: Mouthpiece for your reed
Author: Alex 
Date:   1999-02-15 01:38

I'm using a 3 1/2 V12 reed, or I was at least..I'm using a mitchel laurie 4 1/2 currently, even though I prefer the vandorens, just because it's easier to play on until I figure out what I'm going to do about the mouth piece

Reply To Message
 
 RE: Mouthpiece for your reed
Author: Hiroshi 
Date:   1999-02-15 03:33

1)You can read Vandoren's reed recommendation on B45 at this web site. http://www.vandoren.com/
(See products and click mouthpiece).

2)There is a reed strength comparison table in this web.
http://www.wwandbw.com/
(See "woodwind catalogue" and open its reed section)

3)This is my own relevant question:
I play Zonda 3.5 with Greg-Smith 1.I tried several ligatures (Bay-inverted, Bonard-inverted, Bonard, Rovner, Liguaphone, Buffet double screw, BG inverted single screw etc).I tested the position(angle) of the clarinet to my body.It seemd every ligature has different optimum angle to play good.Straight one tends to be narrower and inverted ones tend to be wider in angle. I also tested how fastening tension of upper and lower screws affect the angle(many teachers says to fasten the upper screw firmly and lower one loosely to enhance vibration) but did not find any affect on this angle.If there is any ligerture hogs like me I would like to know his opinion.

Reply To Message
 
 RE: Mouthpiece for your reed
Author: David 
Date:   1999-02-16 01:56

Had played on a Bonade for a year and was satisfied. Just picked up a new Rovner (Improved! they say). Must say that I am thrilled with it. I can place it a number of ways and get a different quality of sound. Quite versatile.

David



Reply To Message
 
 RE: Mouthpiece for your reed
Author: Frank 
Date:   1999-02-16 19:17

It is possible that your muffled sound is not a function of how stiff your reed is, but rather that your reed has burrs on the flat side.

How are you finishing your reeds? When I have a reed that sounds a bit muffled, I rub the back of it [the flat side] against 400-420 grade marine sandpaper. This polishes the side of the reed against the mouthpiece, especially the part against the rails. If I wish to go further I burnish the reed against some clean white paper. Marine sandpaper is waterproof and the grit does not come away from the backing. The sort I have is on black paper. A single sheet will last for years.

I often use 300 for sanding the other side of the reed; to lessen stiffness as it were.

Make sure you do this on a flat surface.



Reply To Message
 
 RE: Mouthpiece for your reed
Author: Cori 
Date:   1999-02-16 22:45

I like the BG super revelation. The only other ligatures I ahve tried were the rovner and the improved rovner, and the BG really outdid them for me.

Reply To Message
 
 RE: Mouthpiece for your reed
Author: Cori 
Date:   1999-02-16 22:45

I like the BG super revelation. The only other ligatures I ahve tried were the rovner and the improved rovner, and the BG really outdid them for me.

Reply To Message
 
 RE: Mouthpiece for your reed
Author: Hiroshi 
Date:   1999-02-18 01:50

Mmm.I tried a BG also.I don't know whether it is super-revelation or not.It has a synthetic material band like Rovener but it has a metal plate wound to contact reed stock.Naturally it makes my selmer emit brighter tones.I do not say clear but simply brighter tones.I disliked it.If one pursues dark tone including many harmonics,he/she may dislike it.If he/she pursues Michell Alignon kind tones,it may serve him/her.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org