Advertising and Web Hosting on Woodwind.Org!

Woodwind.OrgThe Oboe BBoardThe C4 standard

 
  BBoard              
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: RDG Gouging Machine Care
Author: huboboe 
Date:   2017-07-30 03:16

WD-40 is a good idea. No need to soak it. Jus get it wet under the screw head and under the blade and let it sit for a half hour or so. Then find a piece of soft material like aluminum or brass, set that on top of the screw head and tap it lightly but firmly with a hammer to break loose the rust. The screw should come out easily. If not, repeat.

If the edge is not badly nicked or pitted you can easily sharpen it without changing the curve by laying the blade flat on the stone and sharpening the flat surface rather than the curved surface. when you have raised a burr on the curved side of the blade, strop it off (on your belt or such), remount the blade so that it shaves a hair thin chip across the width of the cane. CAREFULLY pull the carriage backwards across the bed to insure that it doesn't touch the cane stops, then gouge a piece of cane. Measure it and start tweaking the blade to achieve the dimensions you are trying for.

Each time you change a setting, be sure to confirm that the blade doesn't crash the cane stops!

When you split and pre-gouge your cane you will have trash, good pieces and questionable pieces. I suggest you save the questionable pieces for setup, as you will probably use up a lot of cane until you get it right. Then all your good cane will be used for reeds...

If the blade is badly chipped or rusted, you are probably better off buying a new blade from RDG...

Robert Hubbard
WestwindDoubleReed.com
1-888-579-6020
bob@westwinddoublereed.com

 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 RDG Gouging Machine Care  new
sammieshine 2017-05-29 01:43 
 Re: RDG Gouging Machine Care  new
oboeyogi 2017-06-23 13:35 
 Re: RDG Gouging Machine Care  new
huboboe 2017-07-30 03:16 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
is sponsored by:

For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

Music & Books
CDs, Sheet Music, and some of the greatest reference books ever written!

Miscellaneous
Services and products too varied to categorize! Repair, recording, news

Instruments
Retailers and manufacturers of clarinets, both modern and early replica

Reeds
Great reeds available from around the world

Accessories
Accessories that every clarinetist needs - reed makers and shapers, ligatures, greases, oils, and preservatives ... and more!

Service
Instrument repairs, restorations, adjustments, and overhauls.

Events
Major events especially for clarinetists

Mouthpieces & Barrels
Fine makers of mouthpieces and barrels, from wood to crystal to hard rubber and plastic

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org