Advertising and Web Hosting on Woodwind.Org!

Woodwind.OrgThe Oboe BBoardThe C4 standard

 
  BBoard              
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 RDG Gouging Machine Care
Author: sammieshine 
Date:   2017-05-29 01:43

Hi everyone,

This is my first post so I hope I am posting this in the correct place. I recently bought a used RDG gouging machine from someone and I am trying to clean it up myself to save some money.

I know I need to buy a new blade, but I was wondering if anyone out there had some tips/secrets. The bed has some small rust-like spots as do the other metal parts of the machine. The screw holding the blade in is actually stuck and I can't get it undone (I was going to try WD-40 but figured I would ask first).

Any advice?

Thanks! :)

Reply To Message
 
 Re: RDG Gouging Machine Care
Author: oboeyogi 
Date:   2017-06-23 13:35

Hi Sam

I have a RDG machine my self and bought it second or third hand.

Mine has one Allan Key screw to hold and lock the blade down ( its on about 45 deg angle facing the cutting end of the blade) and 3 other fine adjustment screws. if yours is the same it should be just one screw to get the blade off. the other 3 screws would feel suck if the screw locking the blade down was tight.

I hope that helps. other wise WD-40 or better to remove the rust should do if that's all it is.

After you put in a new or sharpen blade in there will be a lot's of adjusting to do. and lots of cane wast.

Nicholas

Reply To Message
 
 Re: RDG Gouging Machine Care
Author: huboboe 
Date:   2017-07-30 03:16

WD-40 is a good idea. No need to soak it. Jus get it wet under the screw head and under the blade and let it sit for a half hour or so. Then find a piece of soft material like aluminum or brass, set that on top of the screw head and tap it lightly but firmly with a hammer to break loose the rust. The screw should come out easily. If not, repeat.

If the edge is not badly nicked or pitted you can easily sharpen it without changing the curve by laying the blade flat on the stone and sharpening the flat surface rather than the curved surface. when you have raised a burr on the curved side of the blade, strop it off (on your belt or such), remount the blade so that it shaves a hair thin chip across the width of the cane. CAREFULLY pull the carriage backwards across the bed to insure that it doesn't touch the cane stops, then gouge a piece of cane. Measure it and start tweaking the blade to achieve the dimensions you are trying for.

Each time you change a setting, be sure to confirm that the blade doesn't crash the cane stops!

When you split and pre-gouge your cane you will have trash, good pieces and questionable pieces. I suggest you save the questionable pieces for setup, as you will probably use up a lot of cane until you get it right. Then all your good cane will be used for reeds...

If the blade is badly chipped or rusted, you are probably better off buying a new blade from RDG...

Robert Hubbard
WestwindDoubleReed.com
1-888-579-6020
bob@westwinddoublereed.com

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
is sponsored by:

For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

Events
Major events especially for clarinetists

Mouthpieces & Barrels
Fine makers of mouthpieces and barrels, from wood to crystal to hard rubber and plastic

Instruments
Retailers and manufacturers of clarinets, both modern and early replica

Accessories
Accessories that every clarinetist needs - reed makers and shapers, ligatures, greases, oils, and preservatives ... and more!

Reeds
Great reeds available from around the world

Service
Instrument repairs, restorations, adjustments, and overhauls.

Music & Books
CDs, Sheet Music, and some of the greatest reference books ever written!

Miscellaneous
Services and products too varied to categorize! Repair, recording, news

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org