Author: huboboe
Date: 2011-04-04 06:23
Hautbois Francais:
I did say 10.5 - 11mm, but I forgot you aren't a mind reader. I was referring to size on size: 10.5 on 10.5 or 11 on 11 will give you, depending on the width of your shape, a 45 sidewall (or close to it) for a 60 center.
Cane is never perfect of course, but I assume the bed diameter matches the cane diameter.
If you gouge single radius, 11mm cane, 10.5mm blade at .50 in the center, you will have a cylindrical section at .50 - .50 - .50. I put in the decimals we usually leave out to keep it all in mm)If you gouge a bit thicker at .60 in the center you will still have narrower sides than center, but not as narrow as .45.
I don't have CAD software to be exact, but tomorrow for fun I'll draw it at 10X scale with a compass and measure the result...
Robert Hubbard
WestwindDoubleReed.com
1-888-579-6020
bob@westwinddoublereed.com
|
|