The Clarinet BBoard
|
Author: marsheng
Date: 2020-05-14 02:22
Attachment: Pad.JPG (11k)
Thanks for the replies. I have used 2 mm but the profession repair chap here uses 1 mm. That may help with the indentation issue.
My pad thickness is 2 mm so the neo sits nicely with the smaller diameter cork fitting into the cup.
With 1 mm, I guess I would need a 1 mm cork backing of same diameter and then 2 mm cork backing of smaller size.
The 2mm neo is more forgiving in the sealing.
I think I will press on with all the pads DIY and see what happens.
I did go to the Valentino pads website before I made my own but the range of options available put me off buying their products. So many sizes from .080 to .130 and ranges
I have emailed them now with my pad sizes to see what they recommend. I'll buy a set anyway in case mine don't work too well.
See attachment.
Post Edited (2020-05-14 02:24)
|
|
|
marsheng |
2020-05-13 14:55 |
|
Paul Aviles |
2020-05-13 15:42 |
|
Ken Lagace |
2020-05-13 17:09 |
|
Tony F |
2020-05-13 18:14 |
|
Steven Ocone |
2020-05-13 18:37 |
|
marsheng |
2020-05-14 02:22 |
|
Bob Bernardo |
2020-05-14 03:15 |
|
Bob Bernardo |
2020-05-14 03:26 |
|
Chris P |
2020-05-16 00:03 |
|
marsheng |
2020-05-17 09:06 |
|
Tony F |
2020-05-17 14:54 |
|
The Clarinet Pages
|
|