Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Bass clarinet intonation issues
Author: jordan.1210 
Date:   2019-01-23 00:38

I have a Bundy bass clarinet that I’d like to use but it has some tuning issues. With the mouthpiece and neck pushed all the way in, it plays nearly a quarter tone sharp. To get it in tune, I have to pull the neck out until it reaches the point where air would begin to leak out the slit in the body left for tightening the neck in and I have to pull the mouthpiece out a few mm. The instrument is in tune with itself so I think it might be because the neck is too short. Would getting a new neck resolve this issue? If it can, how can I find a better neck (length, fit, etc)



Post Edited (2019-01-23 00:43)

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: jdbassplayer 
Date:   2019-01-23 00:52

The necks you can get from China for $60 are a bit longer than stock. The only problem is you will need to sand down the metal tenon a bit. You can also have the neck socket removed and glued in a bit higher. I did this to a Yamaha 221 with great results.

-Jdbassplayer

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: jordan.1210 
Date:   2019-01-23 01:01

Thanks for the quick response.



Post Edited (2019-01-23 01:17)

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: jordan.1210 
Date:   2019-01-23 01:18

Is there any way to make sure that the new neck is longer than the current one I have since it has a different curvature?

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: EaubeauHorn 
Date:   2019-01-23 20:02

"You can also have the neck socket removed and glued in a bit higher. I did this to a Yamaha 221 with great results."

This is great info to have on hand if I get a Yammie....because I had read that they played quite sharp and were hard to get down to A440. But I don't know what a socket is, being unfamiliar with clarinets in general, and wouldn't moving something like that leave a gap where the "bottom" of it used to be if it is moved "higher?"

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: jdbassplayer 
Date:   2019-01-23 21:38

The socket is the metal tube with a screw on it at the top of the upper joint (only on bass clarinet). It's job is to hold the neck in place.

The gap that is created can be filled with a small piece of 1" od tubing. You could also probably leave the gap without much (if any) negative consequences.

-Jdbassplayer

Reply To Message
 
 Re: Bass clarinet intonation issues
Author: EaubeauHorn 
Date:   2019-01-23 22:12

Thanks. I still have a hankering to give the old college try to bass clarinet should I find one I can reach, and this will help if I find I can reach one that happens to plays impossibly sharp.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org