The Clarinet BBoard
|
Author: oian
Date: 2017-09-20 06:34
I made a stand-up peg for my Ridenour low C bass. Just measure the diameter of the original peg and go to your local metal supply person and get a section of drill rod the same diameter (you can use stainless if you like, but the drill rod is stiffer and if you keep it out of floods, will work just fine), cut it to length. Then go to your local "Dollar Store" and get a small "Super Ball" and drill about 3/4 through the ball with a drill slightly smaller than the rod. Press the rod into the ball and you now have a longer peg that works just fine at a cost of considerably less than a custom rod.
John
|
|
|
ajanosa |
2017-09-14 20:00 |
|
Chris P |
2017-09-14 21:04 |
|
clarnibass |
2017-09-14 22:28 |
|
concertmaster3 |
2017-09-15 18:19 |
|
Hurstfarm |
2017-09-16 00:43 |
|
David Spiegelthal |
2017-09-16 17:01 |
|
Re: Standing Bass Clarinet Peg new |
|
oian |
2017-09-20 06:34 |
|
tictactux |
2017-09-21 17:39 |
|
ajanosa |
2017-09-24 18:39 |
|
Merlin_Williams |
2017-09-26 17:56 |
|
The Clarinet Pages
|
|