 The Clarinet BBoard
|
Author: Tony F
Date: 2014-06-18 20:36
Can anyone tell me what the standard barrel length was on the B & H 1010, and what other lengths were available?
Thanks.
Tony F.
|
|
Reply To Message
|
|
Author: ebonite
Date: 2014-06-18 21:54
Tony F wrote:
> Can anyone tell me what the standard barrel length was on the B
> & H 1010, and what other lengths were available?
> Thanks.
>
My set (early 1980's) came with two barrels; 64mm and 65mm
|
|
Reply To Message
|
|
Author: Alseg
Date: 2014-06-18 23:53
Keep in mind that the B and H bore is most likely wider than easily obtained aftermarket replacements.
Former creator of CUSTOM CLARINET TUNING BARRELS by DR. ALLAN SEGAL
-Where the Sound Matters Most(tm)-
|
|
Reply To Message
|
|
Author: Paul Aviles
Date: 2014-06-19 02:50
Mine are 64mm, but I believe I exchange them for the originals which were far too sharp (of course I was using them across the pond in the States).
...........Paul Aviles
|
|
Reply To Message
|
|
Author: Caroline Smale
Date: 2014-06-21 00:28
Just seen this post after hols.
I have a pair of 1010s (482xxx/484xxx) c. late 1970s and the barrels on those are 64.3 - 64.4mm
For Peter Eaton's Elite instruments (same bore as 1010) As far as I remember from about 10 years ago I made the barrels in 61-62-63-64-65mm (possibly 66mm also) lengths and I don't think it will have changed since. The players then selected the lengths that worked for them.
The largest quantities were I think 63-65mm ranges.
|
|
Reply To Message
|
|
The Clarinet Pages
|
 |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
