Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 replacing pads or clarinet?
Author: jangjiman 
Date:   2005-11-08 03:20

how much does it usually cost to get all pads replaced on a wood clarinet?
I have a yamaha 650 and have been playing on it for seven years. I used it for marching band so there is a slight sign of cracking. It hasn't cracked all the way but the surface is split. My clarinet also squeeks a lot more than it used to. Could it be because of my pads or should I get a new clarinet?

Reply To Message
 
 Re: replacing pads or clarinet?
Author: hans 
Date:   2005-11-08 13:52

jangjiman,
After 7 years, your clarinet is long overdue for an inspection and maintenance by an expert repair tech.
Hans

Reply To Message
 
 Re: replacing pads or clarinet?
Author: pewd 
Date:   2005-11-08 14:44

take it to a shop, ask for a quote.

repads run about $175 locally, overhauls $300 on up

what hans said - you're way overdue. don't skimp on maintenance - you'll be amazed at the difference after a compentent tech works on the horn.

- Paul Dods
Dallas, Texas

Reply To Message
 
 Re: replacing pads or clarinet?
Author: Chris P 
Date:   2005-11-08 14:47

...and as it's a Yamaha 650, it will make economical sense having it repadded as well. Think of the amount you've saved yourself over that time if you've never had much work done, so I reckon a complete overhaul will improve matters.

I had a Buffet R13 that had never been to a repairer in the 8 years of it's use - and it was in dire need of an overhaul. The customer is happy with the results as well, even though they did think the price of an overhaul was steep - but again they've saved themselves nearly £1000 in repair bills and the overhaul cost was a fraction of that.

Reply To Message
 
 Re: replacing pads or clarinet?
Author: GBK 
Date:   2005-11-08 15:08

After you get your clarinet repadded or overhauled, you might also consider picking up a cheap plastic clarinet to use exclusively for marching band...GBK

Reply To Message
 
 Re: replacing pads or clarinet?
Author: Bob Phillips 
Date:   2005-11-08 19:23

I just had a wonderfully competent overhaul on my R-13 Full Boehm at Muncy Winds (sponsors this site); it cost $500. The horn now plays better than I do (now, that's damning with faint praise, lets say that all mistakes are now mine.)

On the other hand, I had it repadded for $100 or so from a vendor on eBay; and it was unsatisfactory. Get a great tech involved with you and your horn.

Bob Phillips

Reply To Message
 
 Re: replacing pads or clarinet?
Author: Gordon (NZ) 
Date:   2005-11-08 20:09

"....repadded for $100 or so from a vendor on eBay"

What do they do? Just whip the keys off, throw new (self-adhesive?) pads in, and whip the keys back on? I reckon that could be done in 20 minutes. (It would then need re-doing)

Reply To Message
 
 Re: replacing pads or clarinet?
Author: tictactux 2017
Date:   2005-11-09 07:08

> I reckon that could be done in 20 minutes.

I repadded mine myself (a $20 ebay clunker doesn't justify $100+ in repair cost), but all in all it took about 2 hours for the padding alone (especially the removal of the old pads can be a PITA, depending on the glue used). Never heard of (and probably wouldn't trust) self-adhesive pads. I get a set of Pisonis for ~10 bucks here, can't be much cheaper.

I wouldn't do a 650 Yamaha myself, though. It deserves better. ;)

--
Ben

Reply To Message
 
 Re: replacing pads or clarinet?
Author: jangjiman 
Date:   2005-11-10 03:56

what exactly do they do when they overhaul a clarinet? For some reason, when I play my low "A", it makes a wierd buzzing noise. It's from one of the parts.

Reply To Message
 
 Re: replacing pads or clarinet?
Author: Gordon (NZ) 
Date:   2005-11-10 07:23

For me it means to attend to all the mechanical things, and poor aspects of manufacture, and replacing corks, springs as needed, etc - whatever is needed in order to put the instrument into a state where it is expected to play at its best and be reliable, or need very little touch-up adjustment, for a good many years. An overhaul means differing things for different models.

In round figures. I would say that the padding takes up 1/5 - 1/2 of the time of an overhaul, depending on the state of the instrument, including ones that are quite new.

IMO there is not a lot of point in repadding without attending to all the other 'infrastructure'.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org