The Clarinet BBoard

The Ethnic Clarinet The C4 standard

New Topic | Go to Top | Go to Topic | Search | Help/Rules | Smileys/Notes | Log In

Previous Message | Next Message

Re: Hüsnü Şenlendirici

Author: Fanatic
Date: 2006-08-15 15:14

Hi Ralph,

in this case you have to try a few of them.
You have to go to one of your local Hearing aid shop and ask for " Pocket Hearing aid´s ".
This is how they look like:

http://www.oticon.dk/eprOtiScripts/Files/encyclopedia/images/Body_worn_hearing_aid.jpg

The only thing you have to do is to drill one of your barrels. Some are taking a screw with a little hole through it and drill it into the barrell. Some people are just drilling the barrel and fit the aid with tape or whatever.

I prefer to drill a hole in the barrel through one side that big as the hole in the hearing aid. Then I use a snap gring. You have to measure the size of the snapring and use a drillbit of the size of the snapring and countersink it on the surface on the same place so that the snapring can fit by pressing. It must fit good. YOu can fit it also with superglue in the case that you messed it up.

As for the cabe you have to cut the cable and connect the cable you wish to connect in the Mixer, Amplifier, wireless set ort what ever, by soldering.

The hearing aids are not that expensive and it´s alsways the best choice.

Try it and you will see.

Reply To Message | Avail. Forums | Flat View

Newer Topic | Older Topic

Topics