Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Buffet thumb screw won't stay in.
Author: as9934 
Date:   2014-01-12 19:42

I recently received a used buffet e13 and it's been great excerpt for one small problem. When I first got the clarinet I wanted to adjust the thumbrest so I unscrewed the screw that holds it in place and screwed the rest back into place. After about 2 mins of playing the thumb rest and screw fell off. I recovered the rest but the thumb screw was lost until today when I located it under my bed. When i tried to screw in the thumb rest the screw wobbled around and fell out. I think that part of it may have broken off in the hole. My question is this. How can I keep the screw in place? Can I superglue it? Should I replace the screw? Can I jut buy the screw and not have to spend $24 on the complete thumb rest assembly?

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Chris P 
Date:   2014-01-13 00:56

The thread has been stripped, so a replacement will be needed.

Rather than getting another Buffet one, get a Yamaha adjustable thumbrest as these are better made with stronger metal (they're not cast like Buffet ones are) and also have the baseplate repositioned about 10mm above where the existing screw holes are as they're in the same position as the fixed thumbrest screw holes, so you can only adjust down, but not any higher up that a fixed thumbrest would've been (which is defeating the whole object of having an adjustable thumbrest).

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Caroline Smale 
Date:   2014-01-13 03:09

If you are not worried about the use of the ring strap then you can replace it with a standard 3mm screw of appropriate length.

I have made many replacements for these using old style Jupiter saxophone guard retaining screws which are solid brass, have a deep enough head to allow shaping in a lathe, and have a have a much better thread form than those Buffet screws.
A support ring can be made and silver soldered to this new screw if needed.

Later Buffets have a clearance recess drilled under the thumbrest plate to allow a screw to penetrate to a deeper part of the thread but a repairer can easily drill a suitable hole on the older models.



Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: pewd 
Date:   2014-01-13 07:54

They're closer to $35 the last time I looked. www.wwbw.com sells them.
In any event, go to a repair tech, have it replaced.

- Paul Dods
Dallas, Texas

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: hartt 
Date:   2014-01-13 09:20

The next time you want/need to remove the screw....or any screw for that matter.....insert it and lightly/slowly turn it counter clockwise. You will hear/feel a clicking. That is the starting point of the threads. It also centers the screw.
Then, slowly turn it clockwise to tighten
This is assuming a right hand thread. for a left hand (rare) the procedure would be the opposite.

And yes, have the whole thumb-rest raised about 10mm.....for the reason stated by Chris P. Also, the additional height gives a better pinky finger position on the RH cluster keys.

me

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: clarnibass 
Date:   2014-01-13 09:49

>>And yes, have the whole thumb-rest raised about 10mm.....for the reason stated by Chris P. Also, the additional height gives a better pinky finger position on the RH cluster keys. <<

True for some people, but some (though definitely not most) people actually use the adjutable thumbrest in its lowest position.

As far as giving better finger position, that depends on the fingers. I've tried a higher thumbrest position once and the pain was unbearable. Moved it back and everything was fine again.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Steven Ocone 
Date:   2014-01-13 11:18

Chris is right. These thumb rests are awful. The threads in the base of the thumb rest are easily stripped out. I replace them with an old style fixed thumb rest or adjustable thumb rests from Jupiter.

Steve Ocone


Post Edited (2014-01-14 04:54)

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Chris P 
Date:   2014-01-13 17:03

Oh yeah - Jupiter thumbrests are every bit as good as Yamaha and probably cheaper too, so replace the Buffet one for something else that will last.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Gordon (NZ) 
Date:   2014-01-18 08:22

Isn't it a shame when Buffet makes something to a much lower standard than Jupiter has done, and this has gone on for many years now.

Buffet, get your act together! Cast pot("muck")-metal. Shameful! Totally inadequate for this component. It puts the entire instrument at risk when it breaks, as it is sure to do sooner or later.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Chris P 
Date:   2014-01-18 15:13

Considering Buffet have ties with Jupiter going back a few decades now, why not just use Jupiter components such as adjustable thumbrests on Buffet clarinets?

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Garth Libre 
Date:   2014-01-18 16:32

Before the thumb rest is positioned, it would be a good idea if decide if you are going to use the Ridenour rubber device that can be placed over any standard thumb rest. This simple and inexpensive device lets the hand fall in what some say is a more natural position. Not only is it more comfortable but it also allows the hand to be less pinched and more open and the fingers can work with less tension. It requires that the thumb rest be placed in a slightly higher position than it would be normally. It comes on and off in seconds so it need not be stored on the instrument in the case.

Garth, 305-981-4705. garthlibre@yahoo.com

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Gordon (NZ) 
Date:   2014-01-19 07:22

just in passing: A much cheaper and more accessible rubber device is the silicon rubber tubing that kids buy from stationery stores to put on pencils or pens.

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Garth Libre 
Date:   2014-01-19 19:09

The Ridenour rubber thumb rest add on not only protccts the thumb, it also enlarges the effective diameter of the clarinet so that the hand can form an open C instead of a pinched grip. This, I think is it's most important contribution.

Garth, 305-981-4705. garthlibre@yahoo.com

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: gilbertpsk 
Date:   2024-10-14 04:44

Thanks for the suggestion on the yamaha! Do you know if it's a drop in replacement? I'm happy to do the repair myself if I don't have to drill anything. (I have all the tools and work on guitairs...woodwinds are new for me)

Is this the one you recommend? https://www.thomannmusic.com/yamaha_adjustable_thumb_rest.htm

Thank you so much!

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: clarnibass 
Date:   2024-10-14 08:42

I'm not familiar with the Yamaha thumb rest shown in that Thomann link. It might be fine, I don't know.
The one I'm familiar with and often use as a replacement (for many others including Buffet is this one:
https://www.thomannmusic.com/yamaha_adjustable_thumb_rest_ii.htm

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: gilbertpsk 
Date:   2024-10-14 15:43

Awesome and thanks! And this is a drop in replacement for the Buffet (requiring no modifications to the instrument)?

Reply To Message
 
 Re: Buffet thumb screw won't stay in.
Author: Chris P 
Date:   2024-10-14 19:47

I've used that same Yamaha adjustable thumbrest on Buffets and it's a far better design and much better built.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org