The Clarinet BBoard![The C4 standard](/clarinet/BBoard/images/C4.gif)
|
Author: SecondTry
Date: 2022-11-19 21:13
In a single place on the forum, what are all the attributes of a clarinet mouthpiece one can add to this list that comprise the near totality of things that affect how it plays. I'll start what I know must not be an exhaustive list and I'll assume symmetry:
1) the player
2) the tip opening
3) the lay and its curvature
4) the rail thickness
5) the material the mouthpiece is made of
6) something about the internals, I'm sure
7) the mechanism by which it connects to the clarinet, to wit, Brad Behn's multiple rings, versus cork, versus that do hickey piece of hardware being sold that supposedly better transfers energy from the mouthpiece to the clarinet body.
8) something about the beak and its angle
I'd prefer we leave things out like the reed or temperature/humidity.
TIA
|
|
Reply To Message
|
|
Author: Dan Shusta
Date: 2022-11-19 22:52
SecondTry,
"The rail thickness", to me, is slightly ambiguous.
To me, there are actually two distinct "rails" to consider.
1) The side rails
2) The tip rail
To my understanding, thick side and tip rails produce a slow, thuddy response and are usually quite resistant.
Thinner rails "all around" (but not too thin) produce a faster response.
Now, the baffle. Due to my limited understanding, all I know is that its shape has an incredible affect not only on the sound but also on the playability or responsiveness of the mouthpiece.
For all of the internals (like throat size and configuration; the side walls...are they parallel or tilted?; the bore size and configuration, etc.), IMHO, either Brad Behn or someone with a pretty good level of understanding of these parameters would need to comment for the best clarification.
|
|
Reply To Message
|
|
Author: SecondTry
Date: 2022-11-20 00:08
...ironic on "what it's called" and "how it works" both being referred to as some/being baffle[d] ......![;)](http://test.woodwind.org/clarinet/BBoard/smileys/smilie3.gif)
And yes, let's break #4 into two parts...
Thanks.
|
|
Reply To Message
|
|
Author: Paul Aviles
Date: 2022-11-20 04:25
My sit down with Clark Fobes was quite eye opening for me regarding the baffle. Clark reshaped the facing of one of his mouthpieces that I owned to match another maker's mouthpiece of mine (the facings were pretty close to begin with). When I played the reformed Fobes, the result was quite disappointing. The best description was that it played too "closed." The air would just close off on me. Mr. Fobes pointed out that the mouthpiece from the other maker was a particular type of blank from Zinner knows as their "A Blank." This is not to be confused with A Frame, which is a throat that has a wider top than the bottom. The "A Blank" features a particularly deep baffle (apparently there is an absolute dimension after which the baffle becomes too deep and the mouthpiece will never have focus.....this mouthpiece blank comes right up to that number). To make up for the larger volume leading into the bore, the throat is actually made SMALLER.
We can add baffle and throat to the list.
I used to believe that deep baffles were only meant to make the sound less filled with upper partials. According to Brad Behn (at least at one time he referred to this on his website) the deeper baffle also affects how quickly the mouthpiece responds to articulation. The more shallow the baffle, the quicker the reed will "slap back."
Clark Fobes then put the desired facing on a CWF 10K blank that he currently has available. The CWF features a much deeper baffle and the correspondingly smaller throat. In this instance what I experienced with the deeper baffle was a much freer blowing mouthpiece and the sound held at low volume without collapsing. Now, this is only to say that the way I play NOW, this was a much more compatible blank. Only a few years ago I was playing just fine on a standard CF Fobes facing. But it does help to know that the depth and the shape of the baffle can affect how the mouthpiece plays as much as the facing. Oddly (for me) I am not experiencing any noticeable loss of upper partials with the Fobes CWF mouthpiece, it is quite wonderful for the way I currently play and compatible with my Legere Euro Cut reeds.
............Paul Aviles
|
|
Reply To Message
|
|
Author: Dan Shusta
Date: 2022-11-20 05:17
Attachment: SONO A frame throat.jpg (14k)
Paul,
When you stated: "This is not to be confused with A Frame, which is a throat that has a wider top than the bottom."
Interesting...I've never seen this type of "A" frame throat before.
The picture is one of Brad Behn's SONO mouthpieces. This is the only type of "A" frame throat that I have ever seen.
|
|
Reply To Message
|
|
Author: kdk
Date: 2022-11-20 06:13
Maybe it depends on what you call the top and what you call the bottom?
Karl
|
|
Reply To Message
|
|
Author: Paul Aviles
Date: 2022-11-20 15:02
Dan,
I believe you've seen the "A Frame" mouthpiece in the Viotto N1. German mouthpieces are all "A Frame."
Karl,
Unless you are an Italian player from the turn of the century, the top would be the baffle side. Of course then, why is it not called "V Frame?"
...........Paul Aviles
Post Edited (2022-11-20 15:04)
|
|
Reply To Message
|
|
Author: Mojo
Date: 2022-11-20 18:20
Fobes is big on the backbone size and taper being significant.
MojoMP.com
Mojo Mouthpiece Work LLC
MojoMouthpieceWork@yahoo.com
|
|
Reply To Message
|
|
The Clarinet Pages
|
![](/images/misc/transpix.gif) |