Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: ATG Reed Finishing System
Author: kdk ★2017
Date:   2021-03-04 01:36

fernie121 wrote:

> I note on using the ATG system, there isn’t a lot of info on
> working the C section of the reed. Mostly just the tip. But
> after years of working on reeds, I find it maybe even more so
> important to work on the C section of the reed and bring it
> down.

I'm not sure what area you mean by "the C section." If it's the areas just inside each edge a little below the tip between the rails and the spine, yes, I find that area to be almost always too thick in modern Vandorens and in several others I've tried. But that's been my reservation about the ATG approach in general. I find it difficult or impossible to get at that area without swiping over the tip on each pass. Many reeds have thick enough tips to stand up to that, and if the tip itself is unbalanced or too thick overall, sanding Against The Grain is a useful technique and Tom Ridenour's sanding tool is a great help. But working with, for one example, Aria reeds, which seem to be consistently much thinner-tipped than most other makes, it seems as though any material taken from the tip area is damaging, and getting past the tip area without sanding it seems easier from the other direction using other tools.

Karl
 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 ATG Reed Finishing System  new
Hank Lehrer 2003-09-28 15:37 
 Re: ATG Reed Finishing System  new
fmadison 2003-09-30 20:59 
 Re: ATG Reed Finishing System  new
Amanda S 2004-03-13 17:49 
 Re: ATG Reed Finishing System  new
Ray 2003-09-30 21:43 
 Re: ATG Reed Finishing System  new
presto214 2004-05-20 16:03 
 Re: ATG Reed Finishing System  new
TomS 2021-03-02 01:05 
 Re: ATG Reed Finishing System  new
Bill_D 2021-03-02 22:36 
 Re: ATG Reed Finishing System  new
SunnyDaze 2023-08-20 16:22 
 Re: ATG Reed Finishing System  new
kdk 2023-08-20 18:21 
 Re: ATG Reed Finishing System  new
Simon 2003-09-30 23:59 
 Re: ATG Reed Finishing System  new
CPW 2003-10-01 00:36 
 Re: ATG Reed Finishing System  new
fmadison 2003-10-01 02:14 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 02:34 
 Re: ATG Reed Finishing System  new
Ed 2003-10-01 12:07 
 Re: ATG Reed Finishing System  new
CPW 2003-10-01 13:22 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 13:44 
 Re: ATG Reed Finishing System  new
William 2003-10-01 14:30 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-01 14:51 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 14:55 
 Re: ATG Reed Finishing System  new
Ray 2003-10-01 14:57 
 Re: ATG Reed Finishing System  new
Mark Charette 2003-10-01 15:21 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 16:51 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-02 00:40 
 Re: ATG Reed Finishing System  new
Ray 2003-10-02 17:37 
 Re: ATG Reed Finishing System  new
cujo 2003-10-03 05:42 
 Re: ATG Reed Finishing System  new
donald 2003-10-03 13:59 
 Re: ATG Reed Finishing System  new
fmadison 2003-10-03 14:32 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-03 23:35 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-04 12:13 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-04 14:14 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-18 17:18 
 Re: ATG Reed Finishing System  new
BobD 2003-10-04 15:11 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-05 19:05 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-18 21:51 
 Re: ATG Reed Finishing System  new
Bellflare 2003-10-19 01:31 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-19 03:13 
 Re: ATG Reed Finishing System  new
BobD 2003-10-19 10:36 
 Re: ATG Reed Finishing System  new
sfalexi 2003-10-19 20:06 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-20 02:50 
 Re: ATG Reed Finishing System  new
NMumphrey 2004-02-21 01:37 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-21 02:55 
 Re: ATG Reed Finishing System  new
BobD 2004-02-21 21:26 
 Re: ATG Reed Finishing System  new
Joe B 2004-02-21 22:58 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-21 23:45 
 Re: ATG Reed Finishing System  new
Ratanapol 2004-02-22 13:54 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-22 15:32 
 Re: ATG Reed Finishing System  new
sfalexi 2004-02-22 22:46 
 Re: ATG Reed Finishing System  new
Rev. Avery 2004-03-13 17:53 
 Re: ATG Reed Finishing System  new
msroboto 2004-03-13 18:10 
 Re: ATG Reed Finishing System  new
sfalexi 2004-05-20 18:36 
 Re: ATG Reed Finishing System  new
John Scorgie 2004-05-21 23:34 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-05-22 00:26 
 Re: ATG Reed Finishing System  new
fredackerman 2004-05-22 00:51 
 Re: ATG Reed Finishing System  new
presto214 2004-05-26 17:35 
 Re: ATG Reed Finishing System  new
sfalexi 2004-05-26 21:59 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-03 22:34 
 Re: ATG Reed Finishing System  new
kdk 2021-03-04 01:36 
 Re: ATG Reed Finishing System  new
OneWatt 2021-03-04 05:12 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-04 09:26 
 Re: ATG Reed Finishing System  new
nellsonic 2021-03-04 12:07 
 Re: ATG Reed Finishing System  new
Bill_D 2021-03-04 15:54 
 Re: ATG Reed Finishing System  new
TomS 2021-03-11 22:04 
 Re: ATG Reed Finishing System  new
OneWatt 2021-03-12 00:39 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-12 05:18 
 Re: ATG Reed Finishing System  new
kdk 2021-03-12 05:47 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2023-08-20 18:15 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org