Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Case cover for bass clarinet
Author: kdk 2017
Date:   2016-02-10 23:27

I have an old Leblanc bass (to Eb) in its original case. The canvas cover is as old as the clarinet and its case (I bought the instrument very used in 1972).

I'd like to replace the case cover - either commercially or custom made - as an alternative to buying a whole new case. Where should I look? Are there companies that will make custom covers?

Karl

Reply To Message
 
 Re: Case cover for bass clarinet
Author: Hank Lehrer 
Date:   2016-02-11 02:29

KDK,

Try the Colorado Case Co. They will send you an estimate within a day.

http://www.coloradocase.com/

HRL

Reply To Message
 
 Re: Case cover for bass clarinet
Author: Chris P 
Date:   2016-02-11 05:17

A custom made case cover will take into account where the handles and hinges are and where the zips run around it in relation to the thickness of the lid and case clasps.

I'd also suggest you have a deep pocket on top with 2" to 3" depth to it to fit anything in there and maybe have a full width but flat pocket inside it to keep sheet music safe (although you can always put sheet music between the case lid and the inside of the case cover to protect it better).

The lid pocket on my Buffet bass and basset horn cases is a poor less than 1" deep, so it is pushed to its limits when carrying music and instrument stands (I use the K&M bassoon/bass clarinet stands for both).

As you only have two hands to carry stuff, make the most of having extra accessories pockets whenever you have a case cover made.

I think the older Leblanc low Eb bass cases are roughly the same size as an alto sax case but a bit shallower - the low C bass cases being almost the same length as a tenor sax case but not as deep.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Case cover for bass clarinet
Author: CEC 
Date:   2016-02-11 06:44

And there's always Altieri (they do custom bags):

http://www.altieribags.com/

Reply To Message
 
 Re: Case cover for bass clarinet
Author: Zenia 
Date:   2016-02-11 22:42

Is it a one or two piece bass? If two, the Bam case is very good.

Reply To Message
 
 Re: Case cover for bass clarinet
Author: kdk 2017
Date:   2016-02-11 23:59

Thanks. I'm not really looking for a case - I just spent a few dollars a couple of years ago getting the original one repaired and, though it isn't especially jazzy-looking, it holds the instrument very solidly and is about as compact as I can imagine a bass case being. But the canvas cover is probably also original and is literally going to pieces. I could just take it off and leave the case exposed, but I think it's better to have a cover, or maybe I'm just used to having one.

Chris, the case is 22-1/2" long, 13" wide and 4-1/2" deep, flat except for some flaring on the bell side. I'm sure it was the standard case for this instrument. Does anyone sell OEM covers for these legacy cases? I don't think I'd have a problem finding a cover for a standard Buffet pochette double case. Who is now making Leblanc equipment (I've lost track)?

Karl

Reply To Message
 
 Re: Case cover for bass clarinet
Author: Chris P 
Date:   2016-02-12 01:47

The older French Leblanc bass cases were very compact for their time (both low Eb and low C models), but chances are since the American takeover which saw the Leblanc Corp. come into being in the '90s (incorporating several companies), their bass cases were also American made and a lot bigger than the French cases.

So the chances of finding a case cover off the shelf to fit the older bass cases is going to be very slim to impossible - even if there are case covers being made for bass cases which I don't think is likely anymore, most basses are usually supplied in those zip-up lightweight things.

I've absolutely no idea what's happened to Leblanc as things have been changing far too rapidly (and not always for the best) in the whole musical instrument industry. Buffet had bought their French factory to produce the ill-fated E11F, but I think they've since closed that facility down and production of the E12F is now done in Germany.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Case cover for bass clarinet
Author: Mojo 
Date:   2016-02-12 18:38

https://www.altieribags.com/secure/ww_orderform.html

They will may one to fit a rectangular case. They can probably deal with your bell bulge too.

MojoMP.com
Mojo Mouthpiece Work LLC
MojoMouthpieceWork@yahoo.com

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org