Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 separate upper and lower sections
Author: rtmyth 
Date:   2014-02-26 22:13

are the two individually and separately selected, matched during manufacture, or matched after manufacture ? Does it matter?

richard smith

Reply To Message
 
 Re: separate upper and lower sections
Author: Caroline Smale 
Date:   2014-02-27 04:39

It is reputed that in the very distant past the very finest makers selected all the wood or an instrument from the same billet.
My only personal experience working with a hand maker of clarinets was that the joints were matched during manufacture (based on density, appearance etc) after the undersize bore and outline shape profile, tenons/sockets cut but before any toneholes drilled.
I suspect that is not the case for volume makers.

Does it matter?
My gut instinct is that those old time makers had an intuition based on long experience that suggests it does. But in modern times when wood is bought in bulk with no chance of knowing which tree the various pieces came from then probably less so - but the earlier the bits are selected and matched is probably still best.



Reply To Message
 
 Re: separate upper and lower sections
Author: Chris P 
Date:   2014-02-27 11:59

Most billets aren't even related and are usually only long enough to make a single joint from (apart from longer billets used for low C basses, basset horns and basset clarinet lower joints as well as wooden flute bodies, cor anglais and bass oboe joints), so it's highly unlikely both joints will ever be from the same billet.

High end instruments will sometimes have the joints selected so they are a near as possible match in colour and grain pattern, but more often than not they aren't.

Buffet get around this on their E13 to R13/RC clarinets by staining the joints with alcohol based dye to make them look uniform. Schreiber paint the joints on their Buffet E11s and oboes with black paint to make them look uniform.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Post Edited (2014-02-27 12:01)

Reply To Message
 
 Re: separate upper and lower sections
Author: rtmyth 
Date:   2014-02-27 14:33

Thanks for the info!! According to the Libertas video, the two sections are selected, by what criteria I don't know, and then joined and stamped with the same serial number.

richard smith

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org