Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Water in tenons/joint sockets
Author: kjeks 
Date:   2012-09-02 00:44

How should I deal with this? I've just been using my swab, but a little bit of cork grease sometimes gets on the swab. Should I be using something specific to clean out the tenons/joint sockets (which is it anyway)?

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: Chris P 
Date:   2012-09-02 01:21

Yeah - use a piece of kitchen roll/paper towel to dry the sockets and tenons with before putting the clarinet away. That way you won't get grease on your pullthrough which in turn will build up in the bore and in toneholes. Use the pullthrough just for the bore only and the kitchen roll for drying out the sockets and tenons.

Wash your pullthrough to get all the grease off it - you can either wash it by hand or put it in with regular laundry so long as you put it in a gauze bag so the string doesn't get all knotted up.

It's normal for water to collect in sockets, so don't worry about that - just be sure you dry it every time you take your clarinet apart.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: pewd 
Date:   2012-09-02 01:39

FWIW, I use a cotton handkerchief for the tenon sockets.

- Paul Dods
Dallas, Texas

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: Clarineteer 
Date:   2012-09-02 06:45

A good micro fiber cloth does the trick.

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: Chris P 
Date:   2012-09-02 12:09

You can get a fair bit of mileage out of a single sheet of Plenty ("One sheet does Plenty!") - then chuck it away and get a new piece when it's past its best.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: Ken Shaw 2017
Date:   2012-09-02 12:33

I take a sheet of paper toweling wrapped around a screwdriver tip to clean out the gunk that accumulates at the bottoms of the sockets, the shoulders of the tenons, etc.

Plenty paper towels are sold in the U.S. under the name Bounty http://en.wikipedia.org/wiki/Plenty_%28brand%29.

Ken Shaw

Reply To Message
 
 Re: Water in tenons/joint sockets
Author: Caroline Smale 
Date:   2012-09-02 19:43

Any bit of kitchen roll will do - cheapest around!

However it's a good idea to also oil the end grain of your sockets and tenons occasionally to prevent the absorbtion of moisture.
A drop a bore oil (almond oil is fine for this) painted onto the socket inner end grain with a cheap child's paint brush or even a cotton bud works OK.

ps. if you use a good cork grease and apply it in small amounts by finger tip then you won't find any of the build up that Ken mentions.



Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org