Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Replacing LH lever posts
Author: andy collins 
Date:   2009-06-29 20:23

I am refurbishing an old B&H Regent in grenadilla and have had to cut out the rusted LH B and C# posts. I have two replacements from a donor Regent but the internal threads on the body are slightly smaller than the threads of the posts. Any ideas?

Reply To Message
 
 Re: Replacing LH lever posts
Author: tictactux 2017
Date:   2009-06-29 21:06

...completely different metrics, or just a tad smaller in diameter?

In any event you can ream the thread holes in the wood just a wee bit, using a small drill or a dental burr. If you have suitable taps, used the middle or the finest. Retry often for the perfect fit.
If the posts wobble after that treatment, epoxy them in.

--
Ben

Reply To Message
 
 Re: Replacing LH lever posts
Author: skygardener 
Date:   2009-06-30 00:34

If the pitch is the same, you can just tapp the holes with tapps that match the posts.

Reply To Message
 
 Re: Replacing LH lever posts
Author: Chris P 
Date:   2009-06-30 09:16

Andy,

How close are the serial numbers between the two Regents?

The older Regents will have the same pillars as used on other '50s B&H clarinets (up to around 180000) before they changed the keywork in the early '60s, but the plastic Regents will probably have slightly different pillars in some places as they're much later (around '65 onwards).

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: Replacing LH lever posts
Author: Caroline Smale 
Date:   2009-06-30 22:41

Many B&H pillars are made with "Butress" threads (not the normal V profile) and finding a tap for those is tough.
Another point is that, unless you are extremely lucky, when you screw the posts in the machined recesses will not align (these are machined after the pillars were tightened firmly during manufacture).
With a Regent quality instrument I would go for the epoxy fix after slightly opening up the existing pillar holes.



Reply To Message
 
 Re: Replacing LH lever posts
Author: andy collins 
Date:   2009-07-01 07:30

I eventually reamed the threaded holes on the body and the pillars fit. thanks to you all.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org