Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 Repair/refurbish of LeBlanc Noblet advice
Author: Geoff Cashman 
Date:   2000-10-27 18:02

Greetings,

I have a 1969 LeBlance Noblet. Yes, I know it's not the best clarinet in the world, but it's a good one.

My situation is that I essentially put this clarinet into mothballs about 10 years ago. I have periodically taken it out, and put more bore oil on it...about once every few years. When I first did this, I removed all the keys off the instrument, cleaned it extensively, and put bore oil on everywhere I could that didn't have cork or metal.

Problem is, when I was putting it back together I came up short a screw. Argh! I know I have a few screws less, but geeze! :) Ok, another problem is that the cork/wood connecting the two middles pieces has a significant nick in the wood. The nick extends from the end of the piece to the cork on the outside diameter, and half that distance on the inside diameter.

Those are the main problems, though the screw is a minor issue I guess. The pads needs to be replaced as do the springs, though the pads are in worse need than the springs.

The instrument has been in my family since it was brand new, and has been mine since 1974. It is a cherished item. I have played dozens of concerts with this instrument, experienced a great amount of my life with it, and have many fond memories. I refuse to part with the instrument, and want only the best for it.

I am lucky enough to live in a town (Bloomington, Indiana) that has a very strong university music department. However, I am still out in the cold as to who to take this instrument to for repairs. I do NOT want some hack or doesn't really know what they are doing working on it. The nick correction is most significant...it has to be done right. I don't know who the great repair people are in this area. I am willing to ship the instrument if I have to, but prefer not to.

Can anyone tell me of a very good clarinet repair person in Indiana, or recommend a repair person that it is worth shipping this instrument (not from the cost of shipping, but the risk) to?

Thank you very much for any advice you can give. I'd like to bring this instrument out of mothballs and start playing again, and these repairs stand in the way.

-Geoff Cashman
Bloomington, IN
cashman@kiva.net

Reply To Message
 
 RE: Repair/refurbish of LeBlanc Noblet advice
Author: Dee 
Date:   2000-10-27 18:11

I can't help you on a recommendation but just wanted to say that Noblets are very good and well worth refurbishing. All the problems that you mention (even the chip in the tenon) are straight forward repairs. So as soon as you find a competent technician, you should be in good shape.

If there are any colleges or universities nearby, contact their music departments and find out who their clarinet teachers are. Then contact the teachers for repair tech recommendations.

Reply To Message
 
 RE: Repair/refurbish of LeBlanc Noblet advice
Author: Nate Zeien 
Date:   2000-10-27 21:09

Hmmm... Quite intersting. I, myself have an old Noblet which I'm in the process of overhauling. The screw is no real big deal, as you can get a replacement from a repair tech. You may have to bring in another identical screw, or the post or clarinet from which it is off from. I myself have a method of putting the posts, screws, etc. into coin tubes used for rolls of pennies. The nick in the tenon can be fixed by a good repair tech. As mentioned above, clarinet teachers in the area are your best bet for recommendations. Good luck to you in your repair! -- Nate Zeien

PS - A large magnet is handy to put screws on, that way they dont get lost. I found out early on that carpet is not a fun place to lose a screw. :-)

Reply To Message
 
 RE: Repair/refurbish of LeBlanc Noblet advice
Author: Anji 
Date:   2000-10-27 21:12

Try Cindy Fields, "The Clarinet Doc". She has a very reasonable approach to repairs like this. Be advised, tenon repair is involved and expensive.

If the horn is to be played, it will have some new eccentricities after repair.
If it is for display, it should come out just fine.

Cindy can be found through the resources on sneezy or www.clarinetdoc.com

Reply To Message
 
 RE: Repair/refurbish of LeBlanc Noblet advice
Author: Ken Rasmussen 
Date:   2000-10-28 02:28

You could get a tenon cap fitted over your nick. If they fill the nick with glue, remove the excess, and fit a metal cap your horn will look as good as new as regards the tenon, and it will be stronger that new.

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org