The Clarinet BBoard
|
Author: jangjiman
Date: 2005-11-08 03:20
how much does it usually cost to get all pads replaced on a wood clarinet?
I have a yamaha 650 and have been playing on it for seven years. I used it for marching band so there is a slight sign of cracking. It hasn't cracked all the way but the surface is split. My clarinet also squeeks a lot more than it used to. Could it be because of my pads or should I get a new clarinet?
|
|
Reply To Message
|
|
Author: hans
Date: 2005-11-08 13:52
jangjiman,
After 7 years, your clarinet is long overdue for an inspection and maintenance by an expert repair tech.
Hans
|
|
Reply To Message
|
|
Author: pewd
Date: 2005-11-08 14:44
take it to a shop, ask for a quote.
repads run about $175 locally, overhauls $300 on up
what hans said - you're way overdue. don't skimp on maintenance - you'll be amazed at the difference after a compentent tech works on the horn.
- Paul Dods
Dallas, Texas
|
|
Reply To Message
|
|
Author: Chris P
Date: 2005-11-08 14:47
...and as it's a Yamaha 650, it will make economical sense having it repadded as well. Think of the amount you've saved yourself over that time if you've never had much work done, so I reckon a complete overhaul will improve matters.
I had a Buffet R13 that had never been to a repairer in the 8 years of it's use - and it was in dire need of an overhaul. The customer is happy with the results as well, even though they did think the price of an overhaul was steep - but again they've saved themselves nearly £1000 in repair bills and the overhaul cost was a fraction of that.
|
|
Reply To Message
|
|
Author: GBK
Date: 2005-11-08 15:08
After you get your clarinet repadded or overhauled, you might also consider picking up a cheap plastic clarinet to use exclusively for marching band...GBK
|
|
Reply To Message
|
|
Author: Bob Phillips
Date: 2005-11-08 19:23
I just had a wonderfully competent overhaul on my R-13 Full Boehm at Muncy Winds (sponsors this site); it cost $500. The horn now plays better than I do (now, that's damning with faint praise, lets say that all mistakes are now mine.)
On the other hand, I had it repadded for $100 or so from a vendor on eBay; and it was unsatisfactory. Get a great tech involved with you and your horn.
Bob Phillips
|
|
Reply To Message
|
|
Author: Gordon (NZ)
Date: 2005-11-08 20:09
"....repadded for $100 or so from a vendor on eBay"
What do they do? Just whip the keys off, throw new (self-adhesive?) pads in, and whip the keys back on? I reckon that could be done in 20 minutes. (It would then need re-doing)
|
|
Reply To Message
|
|
Author: tictactux ★2017
Date: 2005-11-09 07:08
> I reckon that could be done in 20 minutes.
I repadded mine myself (a $20 ebay clunker doesn't justify $100+ in repair cost), but all in all it took about 2 hours for the padding alone (especially the removal of the old pads can be a PITA, depending on the glue used). Never heard of (and probably wouldn't trust) self-adhesive pads. I get a set of Pisonis for ~10 bucks here, can't be much cheaper.
I wouldn't do a 650 Yamaha myself, though. It deserves better.
--
Ben
|
|
Reply To Message
|
|
Author: jangjiman
Date: 2005-11-10 03:56
what exactly do they do when they overhaul a clarinet? For some reason, when I play my low "A", it makes a wierd buzzing noise. It's from one of the parts.
|
|
Reply To Message
|
|
Author: Gordon (NZ)
Date: 2005-11-10 07:23
For me it means to attend to all the mechanical things, and poor aspects of manufacture, and replacing corks, springs as needed, etc - whatever is needed in order to put the instrument into a state where it is expected to play at its best and be reliable, or need very little touch-up adjustment, for a good many years. An overhaul means differing things for different models.
In round figures. I would say that the padding takes up 1/5 - 1/2 of the time of an overhaul, depending on the state of the instrument, including ones that are quite new.
IMO there is not a lot of point in repadding without attending to all the other 'infrastructure'.
|
|
Reply To Message
|
|
The Clarinet Pages
|
|