Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 My poor teeth!
Author: Kontragirl 
Date:   2000-02-27 18:44

No, this isn't about braces, it's about instruments that rest on the ground while you play them. We have one song imparticular that the percussionist just get to go crazy on the bass drum and it makes my contra vibrate, and in turn it makes my teeth vibrate. This is not your regular vibrating, it gets to the point that my teeth hurt.

Not to sound like I'm over concerned or anything, but could this be harmful? Is there anything I can do, or do I just have to live with it?

Reply To Message
 
 RE: My poor teeth!
Author: Don Berger 
Date:   2000-02-27 19:32

K G - Do the vibes come thru the floor via your cl's peg? If the sound is that intense, I believe much exposure could cause hearing prob.s like my tinitus. I use mp cushions just for comfort on single-lipping, rubber ones preferred, thicker ones could be made from old inner tubes!! Otherwise use a rubber pad or tip to the peg, or just lift for the drum solo. Luck, Don

Reply To Message
 
 RE: My poor teeth!
Author: Kontragirl 
Date:   2000-02-27 22:21

I'm on contralto so my instrument is resting on the floor. I try to lift it during the bad parts, but sometimes I forget, and right now, my shoulders are sore so I can't without making my shoulders hurt.

Reply To Message
 
 RE: My poor teeth!
Author: Willie 
Date:   2000-02-28 00:36

I use an old junk clarinet case to rest my contra on. It absorbs the vibes and holds all the extra junk I keep with my contra (extra MP, reeds, screwdrivers, pliars, etc.).

Reply To Message
 
 RE: My poor teeth!
Author: Katherine Pincock 
Date:   2000-02-28 00:56

A piece of carpet under the drum absorbs a lot of vibrations, and my band has used this technique before when the vibrations got out of hand, so you might give this a try. You can usually get scraps of carpeting for reasonable prices. Otherwise, you can also get a cello donut, as they're called, for your peg: it's a rubber circle with a metal covered depression in the centre for resting the peg in. Most music stores carry them, and they'll both prevent slipping and stop vibrations, without raising the peg off the ground too much. HOpe this helps!

Reply To Message
 
 RE: My poor teeth!
Author: James 
Date:   2000-02-28 01:36

You might try a double or even triple thickness of carpet cut fairly small (about 3-4 inch square) and sewn together to make a pad for your peg. Good luck!

Reply To Message
 
 RE: My poor teeth!
Author: Lelia 
Date:   2000-02-28 21:00

Could this be yet another use for one of those extra computer mouse pads that always seem to accumulate...?


Reply To Message
 
 RE: My poor teeth - high sound levels and hearing!
Author: Frank O'Brien 
Date:   2000-03-04 08:08

Something was noted in the start of this exchange about sound levels - but this was not picked up in the later messages.

If there is this much sound [to cause annoying vibration] what is happening to your hearing? High sound levels can lead to hearing loss - and such loss is forever. Has anyone checked the sound levels in your rehersal space? A decible meter is easy to use.


Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org