The Clarinet BBoard
|
Author: Gordon (NZ)
Date: 2005-01-26 03:13
I prefer to hole the Ferrees collet tool in my hand during use, to get a better feel of alignment, and also to turn the tool rather than the key.
When tightening the tool, I get sufficient torque on the base of the tool by having enlarged its diameter.
I took some ABS rod of sufficient diameter (I chose 1 1/4"), and drilled a hole through a few inches of rod. The hole was appropriate diameter such that it could be tightly forced over hexagonal body of the tool.
|
|
|
Douglas |
2005-01-24 20:11 |
|
David Spiegelthal |
2005-01-24 21:08 |
|
ron b |
2005-01-24 22:34 |
|
David Spiegelthal |
2005-01-24 22:39 |
|
Pete |
2005-01-24 23:31 |
|
jbutler |
2005-01-25 00:57 |
|
ron b |
2005-01-25 04:43 |
|
LeWhite |
2005-01-25 06:58 |
|
Gordon (NZ) |
2005-01-25 07:21 |
|
Ray |
2005-01-26 14:04 |
|
donald |
2005-01-25 09:35 |
|
BobD |
2005-01-25 12:57 |
|
Ray |
2005-01-25 13:16 |
|
jmsa |
2005-01-25 13:42 |
|
ron b |
2005-01-25 18:46 |
|
jmsa |
2005-01-25 18:50 |
|
jbutler |
2005-01-26 00:21 |
|
Gordon (NZ) |
2005-01-26 03:13 |
|
Ken Shaw |
2005-01-26 14:34 |
|
jbutler |
2005-01-26 23:05 |
|
Gordon (NZ) |
2005-01-27 09:06 |
|
Gordon (NZ) |
2005-01-27 09:11 |
|
Ken Shaw |
2005-01-27 14:44 |
|
Gordon (NZ) |
2005-01-28 01:50 |
|
GBK |
2005-01-27 15:22 |
|
BobD |
2005-01-27 15:31 |
|
Ken Shaw |
2005-01-28 13:54 |
|
The Clarinet Pages
|
|