Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: ATG Reed Finishing System
Author: Ray 
Date:   2003-09-30 21:43

Well, Frank said it well. I have used the ATG for about five months, and I have never failed to get a reed to play very well. Most of the time I get the reed to play excellently. I have never made a reed worse than it was.

The ATG system is intended to finish and adjust reeds that are fairly close to being the right reed for your mouthpiece, but I have been often resurrecting "bad" reeds or reeds that are way too hard for my mouthpiece(s). This is more work than finishing reeds that are already pretty close. In this case, more work might mean as much as five or eight minutes of testing and sanding to get the unplayable reed up to very good. Right now I rotate among eight reeds (mixed brands) and don't care which one I play.

The longer you use the system the more sensitive to the testing results you become and the faster you get great reeds. I have used several systems over the years. I have always been one to try to get the best out of a reed. The ATG system works far better than anything else I have used. I even got some old Olivieri 4 1/2 Tempered reeds to play!

Mr. Ridenour recommends adjusting reeds the first time you play them, not after a break-in period. He argues that playing an unbalanced reed is causing it to vibrate in the wrong way. That can do harm to the reed, and certainly does no good. I have followed his advice and find that my reeds change very little or not at all after the first adjusting session and during the "break-in". In truth, I don't think there is really a break-in period for a well balanced reed. There is just a long play-it-and-enjoy-it-period.

BTW, I have seen Mr. Ridenour demonstrate the system during which he adjusted a Legere reed to play beautifully. The Legere is harder than cane and takes more time, but the ATG system is effective on them too.

I have shown the system to several people. Those who have gotten it are sticking with it and are very happy.

Best regards,
Ray

 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 ATG Reed Finishing System  new
Hank Lehrer 2003-09-28 15:37 
 Re: ATG Reed Finishing System  new
fmadison 2003-09-30 20:59 
 Re: ATG Reed Finishing System  new
Amanda S 2004-03-13 17:49 
 Re: ATG Reed Finishing System  new
Ray 2003-09-30 21:43 
 Re: ATG Reed Finishing System  new
presto214 2004-05-20 16:03 
 Re: ATG Reed Finishing System  new
TomS 2021-03-02 01:05 
 Re: ATG Reed Finishing System  new
Bill_D 2021-03-02 22:36 
 Re: ATG Reed Finishing System  new
SunnyDaze 2023-08-20 16:22 
 Re: ATG Reed Finishing System  new
kdk 2023-08-20 18:21 
 Re: ATG Reed Finishing System  new
Simon 2003-09-30 23:59 
 Re: ATG Reed Finishing System  new
CPW 2003-10-01 00:36 
 Re: ATG Reed Finishing System  new
fmadison 2003-10-01 02:14 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 02:34 
 Re: ATG Reed Finishing System  new
Ed 2003-10-01 12:07 
 Re: ATG Reed Finishing System  new
CPW 2003-10-01 13:22 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 13:44 
 Re: ATG Reed Finishing System  new
William 2003-10-01 14:30 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-01 14:51 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 14:55 
 Re: ATG Reed Finishing System  new
Ray 2003-10-01 14:57 
 Re: ATG Reed Finishing System  new
Mark Charette 2003-10-01 15:21 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-01 16:51 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-02 00:40 
 Re: ATG Reed Finishing System  new
Ray 2003-10-02 17:37 
 Re: ATG Reed Finishing System  new
cujo 2003-10-03 05:42 
 Re: ATG Reed Finishing System  new
donald 2003-10-03 13:59 
 Re: ATG Reed Finishing System  new
fmadison 2003-10-03 14:32 
 Re: ATG Reed Finishing System  new
wyatt 2003-10-03 23:35 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-04 12:13 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-04 14:14 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-18 17:18 
 Re: ATG Reed Finishing System  new
BobD 2003-10-04 15:11 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-05 19:05 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-18 21:51 
 Re: ATG Reed Finishing System  new
Bellflare 2003-10-19 01:31 
 Re: ATG Reed Finishing System  new
msroboto 2003-10-19 03:13 
 Re: ATG Reed Finishing System  new
BobD 2003-10-19 10:36 
 Re: ATG Reed Finishing System  new
sfalexi 2003-10-19 20:06 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2003-10-20 02:50 
 Re: ATG Reed Finishing System  new
NMumphrey 2004-02-21 01:37 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-21 02:55 
 Re: ATG Reed Finishing System  new
BobD 2004-02-21 21:26 
 Re: ATG Reed Finishing System  new
Joe B 2004-02-21 22:58 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-21 23:45 
 Re: ATG Reed Finishing System  new
Ratanapol 2004-02-22 13:54 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-02-22 15:32 
 Re: ATG Reed Finishing System  new
sfalexi 2004-02-22 22:46 
 Re: ATG Reed Finishing System  new
Rev. Avery 2004-03-13 17:53 
 Re: ATG Reed Finishing System  new
msroboto 2004-03-13 18:10 
 Re: ATG Reed Finishing System  new
sfalexi 2004-05-20 18:36 
 Re: ATG Reed Finishing System  new
John Scorgie 2004-05-21 23:34 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2004-05-22 00:26 
 Re: ATG Reed Finishing System  new
fredackerman 2004-05-22 00:51 
 Re: ATG Reed Finishing System  new
presto214 2004-05-26 17:35 
 Re: ATG Reed Finishing System  new
sfalexi 2004-05-26 21:59 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-03 22:34 
 Re: ATG Reed Finishing System  new
kdk 2021-03-04 01:36 
 Re: ATG Reed Finishing System  new
OneWatt 2021-03-04 05:12 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-04 09:26 
 Re: ATG Reed Finishing System  new
nellsonic 2021-03-04 12:07 
 Re: ATG Reed Finishing System  new
Bill_D 2021-03-04 15:54 
 Re: ATG Reed Finishing System  new
TomS 2021-03-11 22:04 
 Re: ATG Reed Finishing System  new
OneWatt 2021-03-12 00:39 
 Re: ATG Reed Finishing System  new
fernie121 2021-03-12 05:18 
 Re: ATG Reed Finishing System  new
kdk 2021-03-12 05:47 
 Re: ATG Reed Finishing System  new
Hank Lehrer 2023-08-20 18:15 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org