 The Oboe BBoard
|
Author: Chris P
Date: 2017-01-13 20:46
Do be aware that you'll have to replace both of the banana key pillars with two equal height ones (both short) for the rocker to work better - that and milling out a slot in the body beneath the low B key foot.
Those are the only mods to do on the body itself as all the rest is involving the keywork - you're basically rebuilding and modifying the entire left hand and most of the right hand pinky keys. Only the Eb and C# pad cups, the RH Eb key, RH main action, C-D trill key and LH F linkages will be left as they were.
You can always leave the low B and Bb unlinked if you want as low Bb can be played by holding down both the low B and Bb touches together - that shouldn't be much of a problem and in some ways it could be at an advantage.
I linked mine up but can't do that with a tab as normal, so I fitted a linkage arm right at the tenon end of the lower joint which seemed to be the easiest thing at the time. It works fine, but you do have to make sure the bell is lined up spot on for it to work (especially if you've got cork pads fitted throughout).
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
|
Lux |
2017-01-07 04:34 |
|
Chris P |
2017-01-07 09:07 |
   |
Re: Left C# photo request new |
|
Chris P |
2017-01-13 20:46 |
|
The Clarinet Pages
|
 |
.jpg){kind=small}
