Woodwind.OrgThe Oboe BBoardThe C4 standard

 
  BBoard              
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 checking the seal of the lower joint
Author: EaubeauHorn 
Date:   2019-10-16 23:13

OK, I can figure out how to hold everything shut to check the upper joint for leaks; it is definitely ok. However I highly suspect the lower joint as having problems but I don't know what they are, and I simply cannot figure out how to close off everything to do the suction test; I don't have enough hands. Is there a picture somewhere of someone doing this?

Reply To Message
 
 Re: checking the seal of the lower joint
Author: purpleyclouds 
Date:   2019-10-18 12:17

Hi EaubeauHorn, do you mean the middle joint? I do this by making a seal with my mouth on the top tenon, holding down RH1, RH2, RH3 and the low C key with my right hand, sealing the lower tenon with the palm of my left hand and closing the low B vent with my left pinky. Hope this helps!

Reply To Message
 
 Re: checking the seal of the lower joint
Author: Chris P 
Date:   2019-10-18 15:54

With just the lower joint, close off all the RH fingers and hold the low B closed and seal off the tenon with your left hand, then suck the air from the socket making sure you don't accidentally get the feather keys up your nostrils. And with cors anglais, watch out for the feather keys poking you in the your eye when doing this same test.

The usual suspect is the forked F vent which is fully closed while no fingers are on the RH main action, then it opens when just RH3 is held down (as though you're playing forked F) and closed by RH2 whilst RH3 is held down.

Check that by keeping RH3 held down and opening/closing RH2 and using a feeler gauge, checking the forked F vent pad and RH2 pad to be sure both are closing together. Also check the small F# pad (in between RH 1 and 2) and its closure with RH2 and 3.

Chances are a vacuum test will suck the forked F vent closed, so it's not the best test to do in this instance. A much better test is a pressure test by either gently blowing air into the lower joint while all the keys are held closed and the tenon is sealed off, or using a magnehelic machine which should read 0 when there aren't any leaks.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

Reply To Message
 
 Re: checking the seal of the lower joint
Author: EaubeauHorn 
Date:   2019-10-19 19:53

Thanks!

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org