Advertising and Web Hosting on Woodwind.Org!

Woodwind.OrgKeepersThe C4 standard

 
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: Blowing terminology
Author: Arnoldstang 
Date:   2008-09-19 22:12

I understand the "Reduces The Effect" but you have used the term "model" frequently. ..I will read and study your writing more.
Thanks from myself and hopefully others who are reading this. I realize I am the designated "Blethering Idiot" talking with you. I use terms in a layman fashion and I am sure this causes problems. There is no doubt people distort the meanings of many terms. It would be even easier if it were obscure terms but it is the simplest of words that cause problems. Beyond being the "Blethering Idiot" I have meandered and roamed through this subject matter without paying enough attention to understanding you. This is probably pretty common in communication anyway. People talk/write better than they listen. I am most astounded at your dogged determination and patience in dealing with me.
Finally back to the numbers again. 8-3=5 How do we achieve 8-0=5 If we keep the blow the same....8....You frequently say we keep the blow the same and achieve different daynamic levels. This is expressed by 8+ X=5 X cannot be -3 , 5+0=5 is OK but it is a different blow.

Freelance woodwind performer

Post Edited (2008-09-19 22:29)

 Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 Blowing terminology  new
Arnoldstang 2008-09-18 15:10 
 Re: Blowing terminology  new
Tony Pay 2008-09-18 16:06 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 16:25 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 17:18 
 Re: Blowing terminology  new
Tony Pay 2008-09-18 19:56 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 18:10 
 Re: Blowing terminology  new
Tony Pay 2008-09-18 20:52 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 19:23 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 20:36 
 Re: Blowing terminology  new
Tony Pay 2008-09-18 22:05 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 21:48 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 09:47 
 Re: Blowing terminology  new
Arnoldstang 2008-09-18 22:50 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 10:34 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 13:54 
 Re: Blowing terminology  new
Arnoldstang 2008-09-19 19:27 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 20:44 
 Re: Blowing terminology  new
Arnoldstang 2008-09-19 20:43 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 20:48 
 Re: Blowing terminology  new
Arnoldstang 2008-09-19 22:12 
 Re: Blowing terminology  new
Tony Pay 2008-09-19 23:15 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 05:16 
 Re: Blowing terminology  new
Tony Pay 2008-09-20 17:43 
 Re: Blowing terminology  new
cigleris 2008-09-20 07:22 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 18:35 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 18:54 
 Re: Blowing terminology  new
cigleris 2008-09-20 19:51 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 18:49 
 Re: Blowing terminology  new
Arnoldstang 2008-09-21 02:49 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 19:49 
 Re: Blowing terminology  new
cigleris 2008-09-20 20:28 
 Re: Blowing terminology  new
Tony Pay 2008-09-20 21:36 
 Re: Blowing terminology  new
cigleris 2008-09-20 22:12 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 22:57 
 Re: Blowing terminology  new
Arnoldstang 2008-09-20 23:21 
 Re: Blowing terminology  new
Liquorice 2008-09-21 07:12 
 Re: Blowing terminology  new
Tony Pay 2008-09-21 07:19 
 Re: Blowing terminology  new
Liquorice 2008-09-21 08:03 
 Re: Blowing terminology  new
clarnibass 2008-09-21 09:50 
 Re: Blowing terminology  new
Tony Pay 2008-09-21 10:18 
 Re: Blowing terminology  new
Arnoldstang 2008-09-21 18:58 
 Re: Blowing terminology  new
Tony Pay 2008-09-21 19:37 
 Re: Blowing terminology  new
rdc 2008-09-21 19:34 
 Re: Blowing terminology  new
Tony Pay 2008-09-22 13:55 
 Re: Blowing terminology  new
Arnoldstang 2008-09-21 21:03 
 Re: Blowing terminology  new
cigleris 2008-09-21 21:27 
 Re: Blowing terminology  new
Tony Pay 2008-09-22 07:26 
 Re: Blowing terminology  new
Arnoldstang 2008-09-22 14:01 
 Re: Blowing terminology  new
clarnibass 2008-09-22 14:33 
 Re: Blowing terminology  new
Arnoldstang 2008-09-22 16:14 
 Re: Blowing terminology  new
Arnoldstang 2008-09-22 20:14 
 Re: Blowing terminology  new
rdc 2008-09-23 02:37 
 Re: Blowing terminology  new
Arnoldstang 2008-09-23 05:52 
 Re: Blowing terminology  new
Arnoldstang 2008-09-23 06:53 
 Re: Blowing terminology  new
Tony Pay 2008-09-23 20:25 
 Re: Blowing terminology  new
Arnoldstang 2008-09-24 05:26 
 Re: Blowing terminology  new
mrn 2008-09-24 12:54 
 Re: Blowing terminology  new
Tony Pay 2008-09-24 13:45 
 Re: Blowing terminology  new
Arnoldstang 2008-09-24 14:17 
 Re: Blowing terminology  new
Tony Pay 2008-09-24 18:03 
 Re: Blowing terminology  new
Arnoldstang 2008-09-24 20:30 
 Re: Blowing terminology  new
mrn 2008-09-24 21:15 
 Re: Blowing terminology  new
Tony Pay 2008-09-24 22:02 
 Re: Blowing terminology  new
BobD 2008-09-25 11:35 
 Re: Blowing terminology  new
Arnoldstang 2008-09-25 14:40 
 Re: Blowing terminology  new
Tony Pay 2008-09-25 16:13 
 Re: Blowing terminology  new
Arnoldstang 2008-09-25 17:04 
 Re: Blowing terminology  new
Arnoldstang 2008-09-25 18:46 
 Re: Blowing terminology  new
Tony Pay 2008-09-26 01:04 
 Re: Blowing terminology  new
Arnoldstang 2008-09-26 18:35 
 Re: Blowing terminology  new
Tony Pay 2008-09-26 20:02 
 Re: Blowing terminology  new
Arnoldstang 2008-09-27 00:21 
 Re: Blowing terminology  new
Tony Pay 2008-09-27 10:24 
 Re: Blowing terminology  new
Arnoldstang 2008-09-27 14:39 
 Re: Blowing terminology  new
Mark Charette 2008-09-27 14:44 
 Re: Blowing terminology  new
Arnoldstang 2008-09-27 17:49 
 Re: Blowing terminology  new
Mark Charette 2008-09-27 18:03 
 Re: Blowing terminology  new
Arnoldstang 2008-09-27 18:23 
 Re: Blowing terminology  new
Mark Charette 2008-09-27 18:32 
 Re: Blowing terminology  new
Arnoldstang 2008-09-27 18:52 
 Re: Blowing terminology  new
Tony Pay 2008-09-27 22:14 
 Re: Blowing terminology  new
sdr 2008-09-27 22:32 
 Re: Blowing terminology  new
Tony Pay 2008-09-28 06:08 
 Re: Blowing terminology  new
davetrow 2008-09-28 00:13 
 Re: Blowing terminology  new
Arnoldstang 2008-09-28 16:40 
 Re: Blowing terminology  new
Mark Charette 2008-09-28 17:40 
 Re: Blowing terminology  new
davetrow 2008-09-28 20:51 
 Re: Blowing terminology  new
Tony Pay 2008-09-28 22:16 
 Re: Blowing terminology  new
davetrow 2008-09-28 23:13 
 Re: Blowing terminology  new
Tony Pay 2008-09-29 20:59 
 Re: Blowing terminology  new
Arnoldstang 2008-09-29 00:01 
 Re: Blowing terminology  new
Mark Charette 2008-09-29 01:40 
 Re: Blowing terminology  new
Arnoldstang 2008-09-29 02:24 
 Re: Blowing terminology  new
Mark Charette 2008-09-29 02:42 
 Re: Blowing terminology  new
Tony Pay 2008-09-29 20:37 
 Re: Blowing terminology  new
Arnoldstang 2008-09-29 21:08 
 Re: Blowing terminology  new
Mark Charette 2008-09-29 23:02 
 Re: Blowing terminology  new
Arnoldstang 2008-09-30 01:00 
 Re: Blowing terminology  new
vin 2008-09-30 03:41 
 Re: Blowing terminology  new
Sarah Elbaz 2008-09-30 08:01 
 Re: Blowing terminology  new
Liquorice 2008-09-30 14:36 
 Re: Blowing terminology  new
Arnoldstang 2008-09-30 18:10 
 Re: Blowing terminology  new
Tony Pay 2008-09-30 23:50 
 Re: Blowing terminology  new
cigleris 2008-09-30 18:16 
 Re: Blowing terminology  new
Arnoldstang 2008-10-01 14:41 
 Re: Blowing terminology  new
cigleris 2008-10-01 16:09 
 Re: Blowing terminology  new
mrn 2008-10-01 17:57 
 Re: Blowing terminology  new
Arnoldstang 2008-10-02 13:21 
 Re: Blowing terminology  new
Arnoldstang 2008-10-02 13:53 


 This thread is closed 
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
is sponsored by:

For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

Mouthpieces & Barrels
Fine makers of mouthpieces and barrels, from wood to crystal to hard rubber and plastic

Accessories
Accessories that every clarinetist needs - reed makers and shapers, ligatures, greases, oils, and preservatives ... and more!

Instruments
Retailers and manufacturers of clarinets, both modern and early replica

Events
Major events especially for clarinetists

Music & Books
CDs, Sheet Music, and some of the greatest reference books ever written!

Reeds
Great reeds available from around the world

Service
Instrument repairs, restorations, adjustments, and overhauls.

Miscellaneous
Services and products too varied to categorize! Repair, recording, news

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org