Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: 3D printing and clarinets
Author: jdbassplayer 
Date:   2020-04-14 05:49

It's just standard 19mm or 3/4" brass tubing. The inner diameter is not the same as the bore of the instrument but it is close enough to work. 1cm to me seemed like enough to make it sturdy, I suppose you could go further if you wanted to. The tubing is held in with 2-part epoxy and is very solid. I also roughened the surface of the brass to help the epoxy stick. I think there is a 0.1mm gap between the inner walls and the tubing. Generally sanding/reaming doesn't remove enough material to make a difference with regards to tuning in my experience. If anything my printer creates slightly oversized parts by about 0.1mm and sanding brings it back into spec. With regards to the material, I generally like to use PLA when i'm not using the wood filament. It is the most common material and is very strong, though maybe a bit brittle compared to other plastics.

-Jdbassplayer
 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 3D printing and clarinets  new
SunnyDaze 2020-04-03 12:09 
 Re: 3D printing and clarinets  new
Tony F 2020-04-03 16:02 
 Re: 3D printing and clarinets  new
Ken Lagace 2020-04-03 16:25 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-03 16:27 
 Re: 3D printing and clarinets  new
jdbassplayer 2020-04-03 17:15 
 Re: 3D printing and clarinets  new
Bob Bernardo 2020-04-03 18:08 
 Re: 3D printing and clarinets  new
Hank Lehrer 2020-04-03 20:00 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-03 20:03 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-03 20:22 
 Re: 3D printing and clarinets  new
Ken Lagace 2020-04-03 21:37 
 Re: 3D printing and clarinets  new
jdbassplayer 2020-04-03 21:55 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-03 22:01 
 Re: 3D printing and clarinets  new
bmcgar 2020-04-04 00:57 
 Re: 3D printing and clarinets  new
jordan.1210 2020-04-04 06:33 
 Re: 3D printing and clarinets  new
Erez Katz 2020-04-04 09:23 
 Re: 3D printing and clarinets  new
jordan.1210 2020-04-05 03:27 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-04 14:45 
 Re: 3D printing and clarinets  new
Ken Lagace 2020-04-04 17:36 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-04 18:58 
 Re: 3D printing and clarinets  new
Ken Lagace 2020-04-04 20:13 
 Re: 3D printing and clarinets  new
richard smith 2020-04-04 20:19 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-04 21:01 
 Re: 3D printing and clarinets  new
SunnyDaze 2020-04-04 21:03 
 Re: 3D printing and clarinets  new
Djudy 2020-04-05 03:38 
 Re: 3D printing and clarinets  new
JTJC 2020-04-12 19:41 
 Re: 3D printing and clarinets  new
jdbassplayer 2020-04-12 20:23 
 Re: 3D printing and clarinets  new
JTJC 2020-04-13 20:46 
 Re: 3D printing and clarinets  
jdbassplayer 2020-04-14 05:49 
 Re: 3D printing and clarinets  new
JTJC 2020-04-14 13:19 
 Re: 3D printing and clarinets  new
clarin-ed 2020-04-22 05:12 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org