Advertising and Web Hosting on Woodwind.Org!

Woodwind.OrgThe Clarinet BBoardThe C4 standard

  BBoard Equipment Study Resources Music General    
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: Barrel for my SML Lemaire Clarinet
Author: Bob Bernardo 
Date:   2017-12-04 10:46

Hi DD Do you happen to know the measurements inside the bore of the 63mm bore? Should be like .585" to .575", or the other way around. The first one is called a reverse taper. The second would be a normal taper. Some barrels are straight. So if you are unsure ask a machinist to measure it, or a decent clarinet repairman. Not all repairmen have the calipers to measure the barrels, the mouthpieces and the horns. I'm sure they won't charge you.

Then pick out a barrel that measures about the same but is longer. Take your tuner with you and try to tune at 441. Yes a lot of groups tune to 440 but 441 gives you that extra security in case you play with a different group. If a group tunes higher you have the 63mm barrel.

Be sure to check the tuning above the high C break. Check and see if these upper notes go flat. This may be a problem you will face with the Vandoren M series mouthpieces being made about 1/32" longer, depending of course on the mouthpiece you measure. If you measure the Vandoren BD5 the distance is actually more than 1/32" even though it is the same company.

If this happens it is advisable to consider a mouthpiece change as well to allow all of the octaves of the horn to play somewhat in tune. Within 5 to 10 cents.

I would perhaps consider nothing too fancy or expensive. For about $150 and less you should find something very good, maybe custom made.

There are a few people that make adjustable barrels. Some are too expensive. Anyway these have built in tuning rings so you turn the outside ring to the exact pitch. Yes they will cost a shade more but you only have to buy one! One fits all. I'm not happy with the Guy Chadash ones because it's too wide and doesn't fit into the case. I also don't like the price. Depending on who you are the cost could be $300 or less, much less, or well over $350 for the same one. Guy shouldn't do this. I hope he reads this because I paid $700 for 2 barrels and someone else paid $550 at the same school he asked me to go to and do a Master Class at.

Anyway, look around, be sure to test several for tuning and sound. Yes sound is a major factor. If you order online make sure that the store will let you return them without a restocking fee of 40 percent or something like that.

Best of luck.

STEUER REEDS Importer played by Sabine Meyer

NEWLY DESIGNED "Vintage 1940 Cicero" Mouthpieces

Yamaha Artist

Post Edited (2017-12-04 11:22)

 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 Barrel for my SML Lemaire Clarinet  new
DD 2017-12-04 09:50 
 Re: Barrel for my SML Lemaire Clarinet  new
Bob Bernardo 2017-12-04 10:46 
 Re: Barrel for my SML Lemaire Clarinet  new
DD 2017-12-05 19:49 
 Re: Barrel for my SML Lemaire Clarinet  new
Pereira3D 2017-12-05 20:34 

 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Remember my login:
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
is sponsored by:

For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

Accessories that every clarinetist needs - reed makers and shapers, ligatures, greases, oils, and preservatives ... and more!

Services and products too varied to categorize! Repair, recording, news

Mouthpieces & Barrels
Fine makers of mouthpieces and barrels, from wood to crystal to hard rubber and plastic

Music & Books
CDs, Sheet Music, and some of the greatest reference books ever written!

Instrument repairs, restorations, adjustments, and overhauls.

Retailers and manufacturers of clarinets, both modern and early replica

Major events especially for clarinetists

Great reeds available from around the world

     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact