Woodwind.OrgThe Clarinet BBoardThe C4 standard

 
  BBoard Equipment Study Resources Music General    
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Newer Topic  |  Older Topic 
 barrel=squeak?
Author: AAAClarinet 
Date:   2013-06-19 05:54

on barrel "1" my clarion A squeaks easily (when playing quick staccato) on barrel "2" it does not squeak. I was unaware that this was something that barrels could cause. both are "pro" barrels. is it just me or have others had similar problems caused by barrels. thanks for any replies.

AAAClarinet

Reply To Message
 
 Re: barrel=squeak?
Author: Tony F 
Date:   2013-06-19 06:09

Are the internal dimensions of the barrels the same? Is there a "step" at either end of barrel 1? Is there any possibility of a leak, however small. at the tenon joints of barrel 1?

Tony F.

Reply To Message
 
 Re: barrel=squeak?
Author: AAAClarinet 
Date:   2013-06-19 06:29

the dimensions are likely not the same, they are two different brand of barrels. there is no step that i am aware of, and no leaks that i have been able to find.

Reply To Message
 
 Re: barrel=squeak?
Author: Lelia Loban 2017
Date:   2013-06-19 13:08

Tony F wrote,
>Are the internal dimensions of the barrels the same? >

I like that suggestion, especially when AAAClarinet adds,
>>the dimensions are likely not the same, they are two different brand of barrels.>>

The sound from a clarinet comes from the column of air vibrating inside the instrument. If the barrel is a different dimension than the original, it could be interfering with the frequency of the vibration.

Lelia
http://www.scoreexchange.com/profiles/Lelia_Loban
To hear the audio, click on the "Scorch Plug-In" box above the score.

Reply To Message
 
 Re: barrel=squeak?
Author: Garth Libre 
Date:   2013-06-19 13:15

I found it easy to discover whether there is a "step" between the barrel and the mouthpiece or the barrel and the top joint by gently probing the connection point with a wooden chopstick. If you stick the chop stick into the barrel from the bottom side you can detect if there is a step down or a step up as you transition to the mouthpiece. The same is true if you probe the barrel - top joint connection ( with the mp disconnected of course). If one is gentle one can feel if the tip of the chop stick has to move up or down or if it transitions smoothly indicating a near bore dimension. My calipers do not have jaws long enough to reach the inner bore. That is why pros use a special tool for this that I don't have. I wouldn't know where to buy a specialized tool like this, nor know how to use it. Note: David Pino says his favorite barrel is not a perfect match to mp or top joint bore, but it still plays both his A and Bb clarinet best of all the options he tried, so this is not an exact science.

Garth, 305-981-4705. garthlibre@yahoo.com

Reply To Message
 
 Re: barrel=squeak?
Author: Tony F 
Date:   2013-06-19 14:48

Clarion A is not a particularly stable note. This is why it is prone to "grunting". This is caused by the dynamics of the air column, and there are people on this BBoard who can give you a much better explanation than I can. This is probably why it is the note that is affected by differences in the barrel dimensions. On several of my instruments I have been able to overcome problems with clarion A by changing to a different mouthpiece. I suspect the most likely cause of your problem is a mismatch between your mouthpiece and barrel 1. It might be worth trying it with a different mouthpiece just to prove the point.

Tony F.

Reply To Message
 
 Re: barrel=squeak?
Author: Steven Ocone 
Date:   2013-06-20 00:17

If one barrel is looser than the other (on upper joint or mouthpiece), It may be leaking at a tenon/socket connection . The squeaky barrel may have a leak itself.

Steve Ocone


Reply To Message
 
 Re: barrel=squeak?
Author: Alseg 
Date:   2013-06-20 03:07

Step-offs between bore diameters between the mpc./barrel/joint are often by design. Gaps are not. BUT the most common barrel-related cause of squeaking is a loose tenon fit.

Disclaimer-I make and sell custom barrels


Former creator of CUSTOM CLARINET TUNING BARRELS by DR. ALLAN SEGAL
-Where the Sound Matters Most(tm)-





Reply To Message
 
 Re: barrel=squeak?
Author: AAAClarinet 
Date:   2013-06-22 16:18

Thank you all for your help. I tightened the fit with some tape and the problem is solved. I've said it before and I'll say it again, I love this board.

AAAClarinet

Reply To Message
 Avail. Forums  |  Threaded View   Newer Topic  |  Older Topic 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org