|  The Clarinet BBoard 
 
    |  |  
    | 
    | Author: Roxann Date:   2014-11-14 20:21
 
 I own a LeBlanc Noblet 45 Eb clarinet.  I've found that it requires a LOT more air pressure to play than my Bb does and I'm wondering if this is normal.  The problem isn't just with a few notes here and there.  It seems to be with all the notes.  If you think there might be something wrong, where would you suggest I start looking for the exact cause of the problem?  Thanks folks:)
 
 
 
 |  |  
    | Reply To Message 
 |  
    |  |  
    | 
    | Author: pewd Date:   2014-11-14 20:25
 
 Yes, they take more air, but shouldn't be so resistant that you can't play them.
 
 First off, try different strength reeds -drop down a 1/2 step and see what happens.
 
 Next, try a different mouthpiece - can you borrow one from a teacher?
 
 Also, check for leaks - blow & suction tests.  Examine the pads, make sure they're in good shape, not torn, etc.
 
 - Paul Dods
 Dallas, Texas
 
 
 
 |  |  
    | Reply To Message 
 |  
    |  |  
    | 
    | Author: Ed Palanker Date:   2014-11-15 19:22
 
 I agree with Paul. Take it to a good tech first, even a small leak can cause havoc. If that's not it you need to try some other mouthpieces and reed strengths.
 
 ESP     eddiesclarinet.com
 
 
 
 |  |  
    | Reply To Message 
 |  
    |  |  
    | 
    | Author: Roxann Date:   2014-11-15 23:33
 
 You two may have "hit the nail on the head."  I think I've made a false assumption regarding reed strength.  I've read that bass clarinets (longer instruments) need softer reeds than what you'd use with a Bb.  I assumed, then, that the Eb (shorter instrument) would need a stiffer reed than what you'd use with your Bb.  And I have been, gradually, going to stiffer reeds.  I just had it in for a tune-up and I totally trust my technician, so I'm quite confident it's most likely not something mechanical.  I'll dig up some soft reeds and see what happens.  Thank you!
 
 
 
 |  |  
    | Reply To Message 
 |  
    |  |  
    | 
    | Author: Ursa Date:   2014-11-16 06:41
 
 In the event that you're using a stock Noblet mouthpiece, many of them have very inefficient facings, requiring much more air support and softer reeds than would a medium-faced mouthpiece crafted to today's standards.
 
 
 
 |  |  
    | Reply To Message 
 |  
    |  |  
    | 
    | Author: Roxann Date:   2014-11-16 07:43
 
 The mpc says "Noblet" so I assume it IS the stock mpc that it came with (I bought the clarinet used).  I'll look into some medium-faced mpc's as you've suggested.  I did play with both a 3 1/4 and a 2 3/4 reed today and found the softer reed much more to my liking.
 
 
 
 |  |  
    | Reply To Message 
 |  
 
 | The Clarinet Pages
 
 |  |