 The Clarinet BBoard
|
Author: cdgaflash
Date: 2005-07-05 20:42
Hi,
I have been having a tough time trying to find more information (on the web)about these horns. I recently purchased one that has articulated G# key/extra sliver on lower joint, adjustable tuning barrel. (I have read some interesting posts about the articulated G# mechanism on this site.)
From what I understand, they were a very good horn back in the twenties and quite collectable now... I have seen pictures of them on a couple of web sites, but that is about it...
What type of pads would be recommended for the overhaul? I've ordered gortex for my Bb (R13) and A (L200), but am not sure about this one... I have heard "leather" for vintage horns. I am hoping to use this horn for outdoor playing- (pending it isn't "lamp" material, as was a Noblet metal clarinet that I have since donated to a local garage sale...)
Any information/guidance would be appreciated.
Eric
Rochester, NY
|
|
Reply To Message
|
|
Author: Ken Shaw ★2017
Date: 2005-07-05 22:04
Eric -
Fixed-up multi-joint silver Selmers have gone for well over $1,000 on eBay. I've never played one, but others have said they're very good.
The main refurbishing work will be to get the tuning barrel smooth and airtight, to fix any pinhole leaks in the metal (particularly around the posts) and to get the pad rims perfectly level. A sax shop is the place to go.
You could also go to a flute shop, since they're used to seating pads on metal rims and work to fine tolerances.
Leather pads could work well, particularly if the tone hole rims are rolled. I'm wary of pores in the leather, though. I'd advise against Straubinger pads, which require meticulous seating. They're designed for flutes that have the same precise, short action on every key and don't have the backlash that's inevitable with clarinet keys. I'd go with the expert's advice on pads.
Ken Shaw
|
|
Reply To Message
|
|
Author: Fred
Date: 2005-07-06 11:22
Eric, that could be a nice clarinet. I'd go with white leather pads on it.
|
|
Reply To Message
|
|
Author: cdgaflash
Date: 2005-07-06 14:58
Thanks Ken and Fred.
I am keeping my fingers crossed on this one... It didn't occur to me to seek a sax or flute tech to work on it, but it is all metal...
I am still waiting for the gortex, talk about a back-order from Buffet. So, something like a Valentino would work well and would be fairly easy to seat, if the rims are OK... Straubingers in high moisture areas on my Bb are already starting to decompose after about 3 years...
Eric
|
|
Reply To Message
|
|
Author: David Spiegelthal ★2017
Date: 2005-07-06 15:57
I don't want to rekindle the "best pads" argument again, but I will simply note that I have been using tan leather pads almost exclusively for the last 7-8 years on every size of clarinet and saxophone (and even on one oboe), including metal clarinets, including instruments with rolled toneholes, with excellent results and no negative reports.
Your mileage may vary, yada yada........
|
|
Reply To Message
|
|
The Clarinet Pages
|
 |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
