 The Clarinet BBoard
|
Author: clarinettefaerie
Date: 2011-02-05 19:25
I've been using the standard Buffet attache-style case for a while now, but it is heavy enough that it has caused the handles on my Altieri case cover to completely rip off. I can get it fixed, no problem. But, a lighter pochette-style case would be wonderful and would hopefully stop this from happening again. I can't seem to find a single pochette case (in any brand aside from Buffet) anywhere on the internet. The Buffet is hard enough to find in a single, but goes up to $239, and I don't have that much money for a clarinet case, of all things. If you have a pochette-style case that is in relatively good condition, or a better solution, please let me know.
Beth H.
|
|
Reply To Message
|
|
Author: Katrina
Date: 2011-02-05 20:28
The Yamaha case that comes with their basic beginner instrument is really small and would probably work for you. I don't remember the model # but it might be the 20?
|
|
Reply To Message
|
|
Author: concertmaster3
Date: 2011-02-06 06:11
The one that came with my CSV seems really nice too. I haven't used it much yet (still breaking the clarinet in...)
Ron Ford
Woodwind Specialist
Performer/Teacher/Arranger
http://www.RonFordMusic.com
|
|
Reply To Message
|
|
Author: Tony M
Date: 2011-02-06 13:02
Every once in a while a post comes along that is a bit like therapy. I had never really articulated to myself that I had a thing about cases until I read this post and then I had to hunt down the case I had in mind. This is the case for my Yamaha YCL-62. My case is the original and it came from Japan twenty odd years ago. But I found this image and code number (Yamaha CLC 30E) and I have no association with the company but their webpage was the one I found that displayed the image.
http://www.sheehans.com/clarinets/cases-covers/pcode=clc30e
I love the case, it tucks under my arm, it fits in my bag, I love the case. Now I have admitted that, I can wonder why it is the case (pun intended).
|
|
Reply To Message
|
|
Author: Chris P
Date: 2011-02-06 13:13
And another for the Yamaha pro/Custom case. They're made from some kind of high density expanded polystyrene (same as Yanagisawa sax cases) so are very light and very well laid out and fitted inside. I use one with my plastic Yamaha YCL-24 as it's compact and has the vinyl case cover with handles on it.
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
Reply To Message
|
|
Author: Manning Woodwinds
Date: 2011-02-06 16:59
Hi,
It's interesting to know that your case ripped. I was thinking about having them make some case covers for us. I'll make sure now to have them triple stitch them.
this might be a solution.
http://www.facebook.com/album.php?id=720700060&aid=610428
Give me a ring if you have any questions
Michael Manning
Manning Custom Woodwinds Inc.
917 513 8140
|
|
Reply To Message
|
|
Author: clarinettist1104
Date: 2011-02-06 19:36
I found a single one here:
http://shop.weinermusic.com/JAKOB-WINTER-FRENCH-POCHETTE-CASE-SINGLE-Bb-CLARINET-721-B/productinfo/CB1SFP/
although I don't own any, the J Winter ones look like they are high quality.
-alex
|
|
Reply To Message
|
|
Author: Chris P
Date: 2011-02-06 20:43
Hopefully the current Winter ones have better clasps than the older ones which were notorious for breaking - so do use a case cover with them just to be on the safe side.
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
Reply To Message
|
|
Author: sfalexi
Date: 2011-02-06 21:24
Quote:
Every once in a while a post comes along that is a bit like therapy. I had never really articulated to myself that I had a thing about cases until I read this post and then I had to hunt down the case I had in mind. This is the case for my Yamaha YCL-62. My case is the original and it came from Japan twenty odd years ago. But I found this image and code number (Yamaha CLC 30E) and I have no association with the company but their webpage was the one I found that displayed the image.
http://www.sheehans.com/clarinets/cases-covers/pcode=clc30e
I love the case, it tucks under my arm, it fits in my bag, I love the case. Now I have admitted that, I can wonder why it is the case (pun intended).
Tony,
Thanks a TON for that information. I love those minimalist cases. Fits the clarinet and NOTHING else. Great for putting two clarinets in a laptop bag and just carrying that bag around. Looks like I have my birthday present selected!
Alexi
US Army Japan Band
|
|
Reply To Message
|
|
Author: Chris P
Date: 2011-02-06 22:16
The Yamaha pro/Custom single Bb case will fit the clarinet plus a spare barrel, a large tub of cork grease (ie. La Tromba) and has a loop at the front for a screwdriver or pencil. Your pullthrough will go in the bell and a sheet of kitchen roll (for drying out the sockets with) can be folded and tucked in behind the ribbon on the top left corner of the lid cushion.
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
Post Edited (2011-02-06 22:27)
|
|
Reply To Message
|
|
Author: Fishamble
Date: 2011-02-06 22:19
I support the Yamaha case suggestion. I bought a Yamaha 26ii on-line last year for £80 really just for the case, but came away with a perfectly good plastic clarinet as a backup too.
The case is the smallest I've come across, holds my Buffet snugly, and it fits in any of my backpacks etc., even with laptop and accessories. Couldn't be happier with it.
|
|
Reply To Message
|
|
Author: clarinettefaerie
Date: 2011-02-06 22:44
I think I am actually going to go with the Yamaha case. I can get one for less than $150 from Alan Gregory UK. (plus, it sounds pretty sturdy and lightweight from what everyone is saying). Thanks! Quick question though... My Tosca has the funky alternate Eb/Ab lever. Will it still fit okay?
I've seen the Jakob Winter cases at Weiner music, but I don't know if it's actually for a Boehm system. I've seen that case on only one other website. They also sold the single pochette Jakob Winter case, but it was only for German system. If I'm paying that much for a case, I really don't want to have it altered to fit my clarinet.
|
|
Reply To Message
|
|
Author: tictactux ★2017
Date: 2011-02-06 22:51
Speaking of cases, I have a full Boehm Amati, and it came in one of those godawful 70s-style leatherette cases (and apparently they only had Tank Green at that time). Now the Full Boehms are a tad longer, so 99% of all aftermarket cases are out. Hints, anyone?
--
Ben
|
|
Reply To Message
|
|
Author: Chris P
Date: 2011-02-06 22:55
Yeah - the Yamaha pro/Custom case. There's plenty of room in them to fit the lower joint in there if you alter the polystyrene tray by trimming/sculpting it to accommodate the extra length, though you will lose the cork grease tub recess.
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
Reply To Message
|
|
Author: Fishamble
Date: 2011-02-07 08:55
I think you'll be okay with the LH Eb/Ab lever. My clarinet has one and it has fitted in the Yamaha case fine.
I had to make a bit of space in the bottom tray to accommodate the adjustable thumb-rest. Very simple process: I just pressed on the velvet to compress the tray material beneath it - the impression remained and the lower joint fits fine.
|
|
Reply To Message
|
|
Author: Clare-net
Date: 2011-02-07 21:35
Beth - I've got a double Winter case and it's perfect for Boehm clarinets - I don't know whether they do do sorts, but the one I have could not fit more perfectly.
|
|
Reply To Message
|
|
Author: Chris P
Date: 2011-02-07 23:05
The Winter cases are designed for Schreiber and Buffet clarinets - they've been making cases for Buffet for decades.
Former oboe finisher
Howarth of London
1998 - 2010
The opinions I express are my own.
|
|
Reply To Message
|
|
Author: susieray
Date: 2011-02-07 23:48
Ditto what Chris said. Jakob Winter makes the Buffet cases. If you buy a "Buffet" pouchette case you are simply buying a Jakob Winter case with a Buffet ribbon inside the top. Otherwise they are identical.
|
|
Reply To Message
|
|
Author: blue_dog
Date: 2011-04-13 15:35
If you're still looking, there's a rather generic brand sold on Amazon. I think it's made in Wisconsin.
|
|
Reply To Message
|
|
Author: shmuelyosef
Date: 2017-04-04 05:36
I've been pretty happy with both the SKB case and the Protec in the "value" segment. I was worried about the SKB latches coming undone, but have never had one move on me, and there is a lock as well for throwing in luggage, etc...It's light and compact with room for an extra barrel, swab and reeds. It fits in my gig bag with a flute, folding sax stand and a large band folio. A saxophone goes in the other hand.
Same with the Protech although you have to be careful because they keep changing them. I bought a MAX a while back (oddly, it's slimmer than the PRO or the Slimline...go figure) and it has a non-padded outside packet that holds 8.5x11 stuff. Nice room inside.
Both are expanded polystyrene so you can reshape the padding (although you can never go back)
|
|
Reply To Message
|
|
Author: Bennett ★2017
Date: 2017-04-04 20:13
Also worth considering are the clarinets with cases on Ebay. Throw away the clarinet and keep the case
|
|
Reply To Message
|
|
The Clarinet Pages
|
 |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
