 The Clarinet BBoard
|
Author: Rishi_G
Date: 2024-12-04 03:26
I have a custom Yamaha clarinet that has a 55mm barrel and a longer upper joint than other clarinets. Anyone know a double case that it can fit inside of? The case it came with is falling apart.
|
|
Reply To Message
|
|
Author: Paul Aviles
Date: 2024-12-04 08:23
I use a single Protec case that has really flexible "stuffing" so there is not a problem fitting my Yamaha CSG in it. I think their double cases may be the same.
Another thing you may try is to order a double case made for German, Oehler system clarinets. They are made to the same ratios (ostensibly the CSGs are "Germanesque" anyway). I had a BAM double case for my Wurlitzers that worked great. I believe any BAM dealer should be able to order that for you.
ALSO...........
Check out what's available on Thomann.de (for example)
https://www.thomannmusic.com/jakob_winter_jw_422n_ab_clarinet_german.htm
..............Paul Aviles
|
|
Reply To Message
|
|
Author: David H. Kinder
Date: 2024-12-04 09:03
You may want to check out Reed and Squeek cases:
https://reedandsqueakcases.com/shop
Ridenour AureA Bb clarinet
Ridenour Homage mouthpiece
Vandoren Optimum Silver ligature (plate 1)
Legere French Cut #4 / #4.25
|
|
Reply To Message
|
|
Author: clarnibass
Date: 2024-12-06 09:49
>> I use a single Protec case that has really flexible "stuffing" so there is not a problem fitting my Yamaha CSG in it. I think their double cases may be the same. <<
With Protec, definitely check the specific model. My Protec case has very firm foam, just barely being able to fit my slightly long clarinet upper section (barrel is 63mm, so it's just 3mm or so longer than a "regular" one). A part a few millimeters longer wouldn't fit.
Mine is a Protec Max. It's also possible they have changed over the years regardless of model, I bought it a few years ago.
Post Edited (2024-12-06 09:50)
|
|
Reply To Message
|
|
Author: gwie
Date: 2024-12-15 11:00
The CSG models will fit in the higher-end BAM cases, which have very soft foam that can be force-squished to accommodate the longer upper joint.
|
|
Reply To Message
|
|
Author: m1964
Date: 2024-12-15 12:23
Also, I'd check the case from Selmer Recital- those are made by BAM, and Recital also has longer upper joint.
|
|
Reply To Message
|
|
Author: donald
Date: 2024-12-21 13:27
Hang dang it Paul, I LOVE that case and would get one in a shot if I had some spare $$$$ floating around...
|
|
Reply To Message
|
|
Author: crazyclari
Date: 2024-12-30 07:25
If you can't get anything else. AliExpress sells case very cheap. I got a double case and cut the lining, pulled out the dividing foam and repacked the Barrell space. It was easier than it sounds and the cut can be glued down and you would not notice.
|
|
Reply To Message
|
|
The Clarinet Pages
|
 |
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
