Woodwind.OrgThe Oboe BBoardThe C4 standard

 
  BBoard              
 
 New Topic  |  Go to Top  |  Go to Topic  |  Search  |  Help/Rules  |  Smileys/Notes  |  Log In   Previous Message  |  Next Message 
 Re: Lined oboes vs. synthetic top joint oboes
Author: Chris P 
Date:   2021-03-26 00:04

Plastic is less stable than wood when it comes to temperature changes when wood is less stable than plastics when subjected to humidity changes. Then there's metal which is the most stable substance out of them all. Mixed together it can be a recipe for disaster unless it's been done with understanding and factoring in the different properties so they will work together.

I've never seen any lined oboes come adrift compared to flutes with metal lined headjoints or bassoons where the ebonite tenor joint bore lining has separated as the much higher density wood oboes are made from (grenadilla, cocobolo, kingwood and rosewood) are of a much thicker walled compared to flute headjoints which split because of the metal lining or bassoons where maple is a much lower density and porous wood compared to rosewoods.

The only oboes with lined joints that are compromised are the Schreiber/Buffet student models where they also line the lower joint which is completely unnecessary and that only leaves a thin shell of wood at the socket which can break off as resin doesn't have the same structural integrity as wood.

On oboes cracks usually happen at the top half of the top joint, so protecting that area from the inside will significantly reduce the risk of that happening. Also with the partial liner, the top joint is still mostly wood and the bore sleeve is around 9mm in diameter (compared to around 19mm to 22mm diameter where the top joint is at its narrowest), so there's plenty of wall thickness of the wood to maintain the strength, the toneholes are bushed through to the lining to prevent any moisture getting in between and with ebonite being dense, I doubt anyone would notice a difference in tone quality compared to an all plastic top joint unless they have ultra-superhuman senses.

If your furnace failed, then the gradual resulting temperature drop won't cause any problem if it was cased up (as would allowing it to slowly warm back up to room temperature) rather than being plummeted straight from room temperature to -40 in a heartbeat, unless you decide to play it from frozen. And bear in mind oboes get shipped around the world in all manner of temperatures and conditions and can end up in some freezing cold warehouse during that time.

Former oboe finisher
Howarth of London
1998 - 2010

The opinions I express are my own.

 Reply To Message  |  Avail. Forums  |  Flat View   Newer Topic  |  Older Topic 

 Topics Author  Date
 Lined oboes vs. synthetic top joint oboes  new
CMW 2021-03-23 05:17 
 Re: Lined oboes vs. synthetic top joint oboes  new
Chris P 2021-03-24 22:53 
 Re: Lined oboes vs. synthetic top joint oboes  new
CMW 2021-03-25 05:44 
 Re: Lined oboes vs. synthetic top joint oboes  new
tgenns 2021-03-25 06:07 
 Re: Lined oboes vs. synthetic top joint oboes  new
Chris P 2021-03-26 00:04 
 Re: Lined oboes vs. synthetic top joint oboes  new
CMW 2021-03-26 07:55 
 Re: Lined oboes vs. synthetic top joint oboes  new
Chris P 2021-03-26 21:17 


 Avail. Forums  |  Need a Login? Register Here 
 User Login
 User Name:
 Password:
 Remember my login:
   
 Forgot Your Password?
Enter your email address or user name below and a new password will be sent to the email address associated with your profile.
Search Woodwind.Org

Sheet Music Plus Featured Sale

The Clarinet Pages
For Sale
Put your ads for items you'd like to sell here. Free! Please, no more than two at a time - ads removed after two weeks.

 
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org