Author: m1964
Date: 2020-11-08 22:28
Hi all,
I was recently trying to change height of the left E/B and F3/C# key levers, and, after achieving the position where I wanted the levers, I found that there is now slight travel of the F/C key with the E/B pad closed. The travel is very little, less than 0.5mm.
What is the best way to have these keys regulated?
1. regulated perfectly (if even possible) - that is there is no travel of the F/C key, and no extra pressure required to close the E/B pad.
2. when the E/B is closed, there is slight gap between the E/B level and the craw foot (like in my case)
3. Need slightly increased pressure on E/B key, in order to close the pad completely- that is if pressing lightly on E/B key, the pad is not completely closed.
Thanks for your input.
|
|