Advertising and Web Hosting on Woodwind.Org!

Klarinet Archive - Posting 000079.txt from 2002/05

From: "Joseph Wakeling" <>
Subj: Re: [kl] tuning: which side of the barrel?
Date: Fri, 3 May 2002 04:49:13 -0400

I got that the "introducing" was a verb, but still wasn't sure what was
being talked about. Thanks for the info!

But... isn't there a potential problem here that the ring might prevent
tuning corrections during performance?


-- Joe

----- Original Message -----
From: "William Wright" <>
Subject: Re: [kl] tuning: which side of the barrel?

<><> Joseph Wakeling wrote:
more detail on "introducing rings", please? :)

When you pull the barrel out, you leave a gap inside the instrument
where the inner surfaces of the barrel and upper joint used to meet.
This effectively changes the shape of the bore, which will damage your
tone and intonation to some degree (perhaps large, perhaps small).

The cure is to fill the gap with a ring that fits inside the barrel
socket. That is, Tony meant the word "introducing" as a verb, not as
an adjective.

The rings are called "tuning rings" because they are used as part of the
tuning process. They are not of identical for every instrument
(because the bore is not identical in every instrument).




     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact