Advertising and Web Hosting on Woodwind.Org!

Klarinet Archive - Posting 000600.txt from 2000/09

From: Fred <fsheim@-----.com>
Subj: Re: [kl] has anyone seen this
Date: Wed, 20 Sep 2000 17:35:18 -0400

I have a 1963 R13 and have never had this. I would assume that mine is
also polycylindrical. Am I correct?

Fred (fsheim@-----.com)

At 10:35 AM 9/20/00 -0600, you wrote:
>DON'T TOUCH IT! What you have observed is the place where the
polycylindrical bore reduces and meets the straight bore of the lower half
of the top joint. It was
>designed this way.
>
>"Musicstudents.com" wrote:
>
>> Dear List Members,
>>
>> I noticed an unusual phenomena inside my R13 clarinet, it seems to be a
very slight hairline crack going perpendicular to the grain, not with the
grain.
>>
>> It forms a ring almost all the way around the bore, in the upper joint
near the throat A hole. It's very straight, too, it almost looks like a
machining mark.
>>
>> Has anyone seen this? Can it be filled or polished?
>>
>> Thanks,
>>
>> Jonathan
>> ----------------------------------------------------------------
>> www.musicstudents.com
>
>
>---------------------------------------------------------------------
>Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
>Subscribe to the Digest: klarinet-digest-subscribe@-----.org
>Additional commands: klarinet-help@-----.org
>Other problems: klarinet-owner@-----.org
>
>

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org

   
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org