Klarinet Archive - Posting 000080.txt from 2010/08

From: Jennifer Jones <helen.jennifer@-----.com>
Subj: Re: [kl] speaker bushes
Date: Fri, 13 Aug 2010 01:12:19 -0400

On Thu, Aug 12, 2010 at 9:40 PM, <kurtheisig@-----.net> wrote:
> They also cause acoustical problems.

What sorts of acoustical problems?

> -----Original Message-----
>>From: Bill Hausmann <bhausmann1@-----.net>
>>Sent: Aug 12, 2010 8:38 PM
>>To: The Klarinet Mailing List <klarinet@-----.com>
>>Subject: Re: [kl] speaker bushes
>>
>>At 09:04 PM 8/12/2010, Jennifer Jones wrote:
>>>I think the sway bar bushings on my car were a hard plastic. =A0What
>>>about the other tone holes? =A0There is the raised part that sticks up
>>>inside the rings for the thumb and fingers. =A0That seems like it would
>>>be added after production of the wooden body of the clarinet. =A0Are
>>>those a sort of bushing?
>>
>>OK, bushings don't HAVE TO be metal.
>>
>>
>>The tone hole chimneys on SOME clarinets are integral to the
>>body. =A0But on many, and especially less expensive ones, even plastic
>>ones, the chimneys are inserts which are glued in. =A0This is much
>>easier to do, and results in far fewer joints being destroyed during
>>the manufacturing process. =A0The downside is that, unless they are
>>done correctly, they CAN leak, or even come loose, and often do on
>>cheap imports from large oriental countries.
>>
>>
>>Bill Hausmann
>>
>>If you have to mic a saxophone, the rest of the band is TOO LOUD!
>>
>>
>>_______________________________________________
>>Klarinet mailing list
>>Klarinet@-----.com
>>To do darn near anything to your subscription, go to:
>>http://klarinet-list.serve-music.com
>
> _______________________________________________
> Klarinet mailing list
> Klarinet@-----.com
> To do darn near anything to your subscription, go to:
> http://klarinet-list.serve-music.com
>
_______________________________________________
Klarinet mailing list
Klarinet@-----.com
To do darn near anything to your subscription, go to:
http://klarinet-list.serve-music.com