Klarinet Archive - Posting 000133.txt from 2006/02

From: Fred Jacobowitz <fbjacobo@-----.net>
Subj: Re: [kl] Eb barrel?
Date: Fri, 10 Feb 2006 10:46:30 -0500

Curtis,
I have been told that there are two schools of thought on cracks:
1) Pin or band them. This will stop that crack from spreading. HOWEVER,
this MAY put undue strain on the rest of the joint and cause cracks in
other places.
2) Simply fill the crack and if it opens more, keep filling it - sooner
or later the wood will stop changing and there will be no more cracks.
HOWEVER, it may be a long time (if ever) before the wood settles down
and conceivably could affect the structural integrity of the wood.
Take your pick. If you fill the crack, you could use a variety of
materials. The folx I spoke to like super glue.
I will say that most of the people I talked to preferred banding. A
minority said just let it be and keep filling.

Fred Jacobowitz

Kol Haruach Klezmer Band
Ebony and Ivory Duo
On Feb 10, 2006, at 10:23 AM, Curtis Bennett wrote:

> I have an Eb clarinet that has a slight crack in the barrel. An
> attempt was made to repair the barrel at one time, but appears to be
> leaking. As such, it no play so well, to put it mildly.
>
> However, if I hold my thumb up to the crack, and "seal" it, what I can
> play with just my left hand sounds superb. It has a clear, resonant
> tone - better, in fact, than the other Eb that I normally play in
> community band.
>
>
> Last night, I put it in a wood clamp, and applied a thin layer of
> super glue over the crack on the inside to see if it would hold. I
> haven't tried it yet, but I suspect that once I put it back on the
> horn, inserting it on the spindle is going to cause it to expand, thus
> re-opening the barrel.
>
> Another solution I had was to put a pipe clamp on it. You know, the
> kind you see under your sink. I could wrap it around, and then screw
> it down real tight. I'd probably paint such a thing black so it didn't
> stand out like a sore thumb.
>
> Given that I only play in community bands (and I'm not even doing that
> at the moment), such a solution at least seems somewhat feasible. I'm
> not so proud to really care what people think of me, or my instrument.
> :)
>
> But my question is - is it possible to fix these kinds of things? How
> feasible is it to replace these barrels? This isn't a Buffet
> instrument, it's a Cabart, so I'm certain that the manufacturer has
> long been lost to time. Can a professional woodworker recreate a
> barrel given an appropriate piece of wood to work with?
>
>
> --
> Curtis Bennett
>
> -------------------------------------------------------------------
> THE WOODWIND.ORG ANNUAL DONATION DRIVE IS GOING ON NOW! VISIT
> https://secure.donax-us.com/donation TO FIND OUT ALL THE FACTS!
> -------------------------------------------------------------------
> Klarinet is a service of Woodwind.Org, Inc. http://www.woodwind.org
>

-------------------------------------------------------------------
THE WOODWIND.ORG ANNUAL DONATION DRIVE IS GOING ON NOW! VISIT
https://secure.donax-us.com/donation TO FIND OUT ALL THE FACTS!
-------------------------------------------------------------------
Klarinet is a service of Woodwind.Org, Inc. http://www.woodwind.org

   
     Copyright © Woodwind.Org, Inc. All Rights Reserved    Privacy Policy    Contact charette@woodwind.org