Klarinet Archive - Posting 000251.txt from 2002/11
From: GrabnerWG@-----.com Subj: Re: [kl] Putty tuning Date: Tue, 5 Nov 2002 12:20:54 -0500
In a message dated 11/5/2002 10:16:26 AM Eastern Standard Time, wsemple@-----.com writes:
>
> On one of my older R-13 (1959) clarinets, the problem is that the clarion register from G to high C goes decidedly sharp, However, the instrument is in far better tune in the
> chalumeau. This could be a barrel problem?>>
I have had some success in reducing "out-sized 12ths" in this area, with a barrel with a fairly sharp reverse taper and a slightly smaller starting bore diameter than is common.
The barrel I currently use (both on Bb and A) tunes the clarion so that the "C" scale is dead on. I have a slightly flat throat F, but that is much easier than dealing with a high B and C 20 cents sharp.
Unfortunately, this barrel design only works on the R-13 bore, (and R-13 clones.)
Walter Grabner
www.clarinetxpress.com
---------------------------------------------------------------------
|
|
|