Klarinet Archive - Posting 000339.txt from 2001/08
From: GrabnerWG@-----.com Subj: Re: [kl] I need Reed information Date: Fri, 24 Aug 2001 15:56:05 -0400
Tom P says:
<<But if I loved the model reed that much I wouldn't have started to make my own. So I would like to hear from this list about reeds. I want to hear about proportions, measurements, I want some science!>>
Tom, I could give you measurements, proportions, etc. for the reeds I do make, but how will that help you?
You don't have the same mouthpiece(s) that I do, or the same mouth, or the same tonal concept.
ALl I can tell you is to experiment and find what works best for you.
I can tell you that I prefer working with a reed blank that's at least 3 mm thick. My finished reeds are approx. 13 mm across at the tip and taper to 11.5 mm at the butt. I try to keep the end of the vamp straight across and not longer than 32 mm.
After that, I do what makes the reed vibrate.
I haven't been making a lot of reeds lately, because I wanted to standardize on a commercial reed for my mouthpiece work. Now that I have more time on my hands however, I plan on spening more time on reedmaking.
Perhaps we can all share information as we go forward.
Walter Grabner
www.clarinetxpress.com
---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org
|
|
|