Klarinet Archive - Posting 000147.txt from 2001/01

From: "Ed & Carol Maurey" <edsshop@-----.ca>
Subj: Re: [kl] Pad measurement
Date: Thu, 4 Jan 2001 11:04:03 -0500

I simply make an inside diameter measurement of the pad cup. If it reads
10.5mm I use a 10.5mm pad in it.
Ed
----- Original Message -----
From: "George Kidder" <gkidder@-----.org>
Subject: [kl] Pad measurement

> A question for one of the techs out there: When you specify (say) a 10.5
> mm pad, is that measured at the maximum diameter, or at the smaller
> diameter which fits the cup? I won't prejudice the answer by saying which
> way I guessed, other than that it seems to have been wrong. (Or there was
> a picking error at Farree's.)
> -----------------------
> George Kidder
> MDIBL
> gkidder@-----.org
>
>
> ---------------------------------------------------------------------
> Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
> Subscribe to the Digest: klarinet-digest-subscribe@-----.org
> Additional commands: klarinet-help@-----.org
> Other problems: klarinet-owner@-----.org
>
>

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org