Klarinet Archive - Posting 000281.txt from 2000/12
From: "Dee D. Hays" <deehays@-----.net> Subj: Re: [kl] Barrel Questions Date: Tue, 5 Dec 2000 19:55:43 -0500
----- Original Message -----
From: <Rgoren@-----.com>
Subject: [kl] Barrel Questions
> ... 4. I see many barrels for sale on the sneezy site as well as ebay. I
> measured my clarinet barrels with a simple ruler and found that both were
66
> mm from metal to metal. Is this the proper length or is the measurement
to
> be taken only on the wooden part of the barrel? [ I am somewhat surprised
> that both my Bb and the A have the same barrel length. Is this common?]
Yes you measure the total length of the barrel. The 66mm is standard for
many clarinets but not all. I know of at least one older clarinet that was
designed with a shorter upper joint so the barrel was designed longer to
make the overall length correct.
> 5. Do all barrels of the same size produce the same pitch? In other
words,
> are there differences in diameter or shape that will change the pitch?
Differences in diameter and shape can change pitch.
> 6. What are the differences in barrel maker? I see brand names listed
for
> the barrels on sale. Are all barrels "created equal"? Should I try to
match
> the brand of the barrel to the brand of my clarinet?
Some people choose to get a barrel from an independent maker as they are
dissatisfied with the stock barrel.
Dee Hays
---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org
|