Klarinet Archive - Posting 000598.txt from 2000/09

From: Richard Bush <rbushidioglot@-----.com>
Subj: Re: [kl] has anyone seen this
Date: Wed, 20 Sep 2000 12:36:31 -0400

DON'T TOUCH IT! What you have observed is the place where the polycylindrical bore reduces and meets the straight bore of the lower half of the top joint. It was
designed this way.

"Musicstudents.com" wrote:

> Dear List Members,
>
> I noticed an unusual phenomena inside my R13 clarinet, it seems to be a very slight hairline crack going perpendicular to the grain, not with the grain.
>
> It forms a ring almost all the way around the bore, in the upper joint near the throat A hole. It's very straight, too, it almost looks like a machining mark.
>
> Has anyone seen this? Can it be filled or polished?
>
> Thanks,
>
> Jonathan
> ----------------------------------------------------------------
> www.musicstudents.com

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org