Klarinet Archive - Posting 000055.txt from 2000/08
From: Spiegelthal.Dave@-----.COM Subj: [kl] Re: Bass clarinet peg Date: Fri, 4 Aug 2000 13:00:56 -0400
You can get the Leblanc peg assembly that attaches to the bell via Ferree's
Tools, it costs about $35. And if you don't want to (or can't) solder it, you
can also sand both mating surfaces and then use the gel-type "superglue"
(cyanoacrylate) adhesive to glue it to the bell. It also helps if, after sanding
and before gluing, you clean the mating surfaces with acetone, or nail polish
remover (which is mostly acetone).
Dave Spiegelthal
Calverton, VA
---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org
|
|
|