Klarinet Archive - Posting 000121.txt from 2000/05

From: George Kidder <gkidder@-----.org>
Subj: Re: [kl] shaping reed tips (was: another half - ended at "reed
Date: Wed, 3 May 2000 06:15:56 -0400

At 01:11 PM 5/2/00 +0000, you wrote:
>George wrote:
>>The Vandoren is not adjustable for tip curve.
>
>Mine is. There's a large metal block that pushes the blade into an arc. A
setscrew moves the metal block. I don't tighten the setscrew all the way,
making the curve slightly shallower.
>
>Mark C.

Permit me to doubt that the manufacturer intended the cutter to be used in
this manner.

George
>
>---------------------------------------------------------------------
>Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
>Subscribe to the Digest: klarinet-digest-subscribe@-----.org
>Additional commands: klarinet-help@-----.org
>Other problems: klarinet-owner@-----.org
>

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org