Klarinet Archive - Posting 001067.txt from 1999/11

From: "Ed Maurey" <edsshop@-----.ca>
Subj: Re: [kl] C clarinet mouthpiece design
Date: Sun, 28 Nov 1999 20:42:51 -0500

Greg,
Thankyou for your reply. All three instruments are Selmer Series9's. I
have messed about with barrels but nothing seems as effective as an enlarged
mouthpiece bore [Francois Kloc's suggestion]. Unfortunately, such a
mouthpiece over-sharpens the altissimo of my Bb and A.

Ed Maurey
-----Original Message-----
From: Gregory Smith <Gregory_Smith_Clarinet@-----.com>
Date: Sunday, November 28, 1999 11:21 AM
Subject: [kl] C clarinet mouthpiece design

Message text written by INTERNET:klarinet@-----.org
>Here is my question: Can one mouthpiece be made to
play in tune on all three?

Ed Maurey<

Depends on the make of clarinets your using. Are they all similar? I use my
own regular mouthpiece on my Bb, A and C (all R-13's) and simply had Guy
Chadash of New York make me a proper length and bored C barrel so that I
can switch back and forth between all three with no effort. The barrel that
came with the C clarinet was the culprit in my situation. It's less likely
that the mouthpiece is the problem in your case.

Gregory Smith
Clarinetist
Chicago Symphony Orchestra
Mouthpiece Handcraftsman
=
Gregory Smith Clarinet Products, Inc.
2737 Hurd Avenue
Evanston, Illinois. 60201-1209
E mail: Gregory@-----.com
Website: www.gregory-smith.com

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org

---------------------------------------------------------------------
Unsubscribe from Klarinet, e-mail: klarinet-unsubscribe@-----.org
Subscribe to the Digest: klarinet-digest-subscribe@-----.org
Additional commands: klarinet-help@-----.org
Other problems: klarinet-owner@-----.org